Electronicsemplois

Yeetek Electronics CO Limited () est une filiale du groupe Ihua, fondé en 2002, et compte actuellement plus de 1 200 employés. Notre activité couvre l'assemblage de circuits imprimés (PCB), la distribution de composants électroniques et les services de fabrication électronique. Nous recherchons actuellement deux (02) télévendeur/euse(s) bilingues junior (français-anglais) dynamiques, super motivé.es et à l’aise au téléphone pour rejoindre notre équipe de vente. Responsabilités du poste : - Vérifier les leads dans notre CRM, prendre des notes et créer des tâches pour vous rappeler de les appeler rapidement. - Contacter les clients potentiels afin ...

**** APPLY FOR THIS JOB ONLY IF YOU ARE AN ELECTRONICS ENGINEER WITH EXPERIENCE OF GPS TRACKERS AND UWB SYSTEMS*** ELECTRONICS - Design and realization of an electronic device that will integrate - 1 GPS tracker (U-blox ZED-F9P module) for geolocation - 1 GNSS antenna - 1 Qorvo DWM1001 module for communication between active devices - 1 4G module - 1 on-board memory for storing non-modifiable data - 1 on-board memory for storing random data - 1 microcontroller - 1 LiPo battery - 1 digital biometrical reader - 1 external connector via cable to a 3 to 5V power source - 4 signal LEDs with different colors (Green, Red, Blue) resistant for 50,000 hours And all configuration software and firmware for integration in GoogleMap and OpenStreetMap I want to design custom electronic...

J'ai réalisé un montage arduino avec les éléments suivants: - arduino nano - capteur de poids (cellule de charge) de 1 kg + module HX711 (Electronic Balance 1kg Scale Load Cell Weight Weighing Sensor with HX711) - 1 led + resistance de 330 ohms - 1 switch (on/off) - 1 module bluetooth HC05 pour communiquer avec smartphone - 1 application Bluetooth Electronics sur smartphone J'ai préparé le code incluant une hystérésis. Sur le smartphone il y a un indicateur de poids, un switch, un indicateur de durée d'allumage et un indicateur de déclanchement de l'allumage de la led. Ce qui fonctionne : affichage du poids sur le moniteur série du PC connexion arduino-smartphone via le bluetoot...

Startup in Clean Energy is looking for an Electronic Engineer with expertise in BMS (Battery Management System), energy storage, connection to the electricity network, etc. This person must be able to make the complete architecture, up to BOM, POC, Prototype, etc. We are looking for a person with a minimum of 10 years of experience with an excellent reference in the field. We favor partners who consider long-term involvement in such a project. An NDA as well as a transfer of IP must be signed before the start of the process. French: Startup dans le Clean Energy est à la recherche d'un Ingénieur Électronique avec des expertise en BMS (Battery Managment System), en stockage d'énergie, en connection au réseau électrique, etc. Cette per...

salut je suis un ingénieur d'électronique je travaille comme un technicien d'instrumentation pendant 6 ans je peux vous aider à faire un projet de fin d études ou n'importe pour construire un détecteur de métaux et aussi le principe de fonctionnement hi i am an electronics engineer i work as an instrumentation technician for 6 years i can help you to do a graduation project or anywhere to build a metal detector and also the working principle

Consumer electronics package design

I want design pcb, electrical, electronics circuit.

AutoCAD, Circuit Design, Electronics, PCB Layout,

AutoCAD, Circuit Design, Electronics, PCB Layout,

...company, always with French & Italian with some Spanish e-mails, and now I am an Internal Sales Representative for an American company based in Bourne End (UK) and French & African companies are my accounts. I am now looking for a part time job as a translator as I would like to have more experience in this and because I like to work by using my skills such as languages. I have a degree in Electronics & Telecommunications, I really love everything that is part of Technology (computing, mobile phone, web design,...). My hobbies are Sport and Music. I am not a membership user yet as I want to know if the website is reliable because I just signed in, however, don't hesitate to contact me if you are interested ! Best regards, Sara....

...finish and brand language Acceptance criteria 1. All contact points survive a virtual drop test and meet standard eyewear flex tolerances. 2. Draft analysis shows zero under-cuts or gating conflicts for single-shot moulding in PC/TR90. 3. Aesthetic proposal matches contemporary lifestyle eyewear trends while keeping SKU cost competitive. If you have a track record in eyewear, consumer electronics casings or similar injection-moulded products, I’d love to see examples and discuss how you would approach this frame in detail....

...finish and brand language Acceptance criteria 1. All contact points survive a virtual drop test and meet standard eyewear flex tolerances. 2. Draft analysis shows zero under-cuts or gating conflicts for single-shot moulding in PC/TR90. 3. Aesthetic proposal matches contemporary lifestyle eyewear trends while keeping SKU cost competitive. If you have a track record in eyewear, consumer electronics casings or similar injection-moulded products, I’d love to see examples and discuss how you would approach this frame in detail....

All of the electronics for my IoT ear-piece are finished—the PCB, battery and micro-controller are already laid out. What I still need is a clean 3D model, built in Blender, that shows only the basic shape and size of the enclosure and the space the electronics will occupy. I don’t have any prior sketches or reference renders, so you’ll be starting from a blank canvas and can suggest a couple of ergonomic outer-shell ideas before we lock the form factor. I will supply the exact board outline, overall component heights and a few photos of the assembled prototype. Accuracy of the external dimensions and the internal keep-out volume is the only critical requirement at this stage; fine surface detailing and fastening features can wait for a later phase. Delive...

I need a skilled technician to diagnose and repair an FDM 3D printer that is currently printing air. The following troubleshooting steps have already been attempted without resolution: - Checked filament feed and loading - Checked for clogs in nozzle - Calibrated the pri...an FDM 3D printer that is currently printing air. The following troubleshooting steps have already been attempted without resolution: - Checked filament feed and loading - Checked for clogs in nozzle - Calibrated the printer bed - Extruder and hot end replaced Ideal skills and experience: - Proficiency in diagnosing and repairing FDM printers - Strong understanding of printer mechanics and electronics - Experience with troubleshooting print quality issues Looking for a detailed diagnosis and effective repair...

I'm seeking a skilled modeler to create a detailed and accurate model of a consumer radio device that's currently in prototype development. Key Requirements: - Experience with mechanical device modeling - Proficiency in CAD software - Ability to work from existing prototype designs and specifications - A...modeler to create a detailed and accurate model of a consumer radio device that's currently in prototype development. Key Requirements: - Experience with mechanical device modeling - Proficiency in CAD software - Ability to work from existing prototype designs and specifications - Attention to detail and accuracy Ideal Skills: - Mechanical engineering background - Previous work on consumer electronics - Strong visualization skills Please provide portfolios sho...

I’m training a machine-learning model that must recognise consumer electronics, so I need a fresh, well-organised image dataset focused exclusively on product shots. The goal is to gather a wide visual range of smartphones, laptops, tablets, headphones, wearables, home-office gear and similar items photographed on plain backgrounds as well as in real-world settings. Here’s the scope in a nutshell: • Source or capture several thousand high-resolution JPEG or PNG images (at least 1024 px on the shortest side). • Keep each file clearly named by product type and brand, then group the images in logical folders for easy ingestion into my training pipeline. • Supply a simple CSV or JSON annotation file that pairs every filename with its product label; boun...

eBay Listing Design & Store Setup Specialist (Electronics / Smartphones) Job Overview: We are looking for a skilled eBay specialist to help us create high-converting, professional listing templates and support the setup and optimization of our eBay store. Our primary focus is on smartphones, especially Samsung Galaxy and iPhone devices. Key Responsibilities: Design modern, visually appealing eBay listing templates Add interactive elements such as clickable banners, navigation tabs, and featured sections Structure listings for better user experience and higher conversions Organize and upload product data (images, descriptions, pricing, specs) Ensure all listings follow eBay policies and best practices Provide suggestions to improve store layout, branding, and performance Produ...

I am looking for a skilled electronics/PCB design freelancer for an industrial IoT device. This is not just a simple PCB layout job. The work includes schematic review, correction, engineering optimization, ESP32 module update, and complete PCB layout in EasyEDA for a compact and reliable product intended for long-term industrial use. Scope of Work: Review and correct the existing schematic Update the ESP32 model/module where needed and improve the design accordingly Optimize the circuit for power stability, EMI/noise immunity, grounding, filtering, and reliability Design a full 2-layer PCB layout from scratch in EasyEDA Use LCSC-preferred components where practical Improve the design for industrial stability and 3+ years reliable operation Key Technical Requirements: 12–24V D...

Veuillez vous inscrire ou vous connecter pour voir les détails.

...can bring the inverter up confidently Acceptance criteria 1. Stable grid synchronisation within 2 AC cycles 2. MPPT efficiency ≥ 99 % under dynamic irradiance (documented test) 3. Remote monitoring frame transmitted every second with no dropped packets in a 24 h soak test 4. Islanding detected and output disabled in < 30 ms If you have prior experience with similar dual-MCU power electronics projects, please share a short example or code snippet when you respond. I look forward to collaborating with someone who can take this control stack all the way to the production line. This 3kW grid-connected single-phase photovoltaic inverter (TMS320F28035 control board + LCM1602 display board + STM32F103 power board) is designed with ALTIUM hardware schematics and PCB ...

I am seeking a skilled Korean-based Virtual Assistant to support busine...supplier relationship management ⸻ Key Requirements • Fluent in Korean and English (written and spoken) • Experience working with manufacturers, suppliers, or B2B sales • Strong communication and organizational skills • Comfortable handling technical terminology (engineering/aerospace is a plus) • Ability to work independently and proactively ⸻ Preferred (Not Required) • Background in electronics, satellite communications, or aerospace • Experience with sourcing, procurement, or international trade • Existing network within Korean manufacturing sectors ⸻ Goal The goal is to build long-term partnerships with Korean companies and onboard them into our growin...

...easily in the hole in the grip Small top collar / flange Bayonet receiver at the top for the smart cap to lock into Please create 2–3 thread size variants for testing fit in real putter grips Important: The hole in the top of the putter grip is approximately 5 mm This should be a small, finer self-tapping insert, not a large chunky thread 2) Smart cap (removable electronics housing) A small round cap that contains the electronics and twist-locks into the threaded insert. Requirements: Round top housing Approximate target size: ~40 mm outer diameter as low-profile as possible 2-lug bayonet twist-lock underneath Approximate twist: 20–25 degrees Must lock repeatably in the same orientation every time Clean, compact, premium-looking external shape Designed for...

Need an AI/Full-Stack freelancer to build an MVP that can recommend compatible IC components and generate a hardware system architecture based on user requirements. Looking for experience in Python, AI/LLMs, recommendation systems, structured databases, and preferably hardware/electronics domain knowledge.

I need a script that checks Amazon every day and extracts the newest listings in the Electronics category. My only required data point is the current price of each new product; nothing else needs to be captured at this stage. Please build the scraper so it: • Runs automatically on a daily schedule (cron-friendly or a lightweight cloud function is fine). • Collects product title, ASIN, product URL, and price, then stores the results in CSV or a simple database table—whichever you find more robust. • Flags only items that did not appear in the previous run, so I have a clean list of what is truly new every day. • Handles Amazon’s anti-bot measures gracefully (rotating user-agents, proxies, or a headless browser approach—your call). &bull...

I’m hosting a multi-category yard sale and need a hand transforming my driveway and lawn into a shopper-friendly space. Your main mission is the physical setup: arranging tables and display areas, then organizing every item so visitors can browse easily and stay a little longer. The inventory is varied—clothing and accessories, household items and furniture, toys and electronics, plus plenty of books and magazines—so smart zoning matters. I’ll supply all merchandise and basic tables; you bring the eye for layout, flow and visual appeal. Clear grouping, logical traffic paths and neat presentation are what I’m after. On the day of the sale, I’d like the area fully staged before the first bargain hunter arrives. That means unloading boxes, position...

The full schematic for this project is already complete; what I now need is a clean, manufacturing-ready board layout for a consumer-electronics product that will sit comfortably in the 10 cm – 20 cm range. All parts are surface-mount, so component placement, routing, and clearances must respect standard SMT design rules and good DFM practice for automated assembly. You will take my schematic file (Altium format, with PDF backup) and turn it into: • Optimised board outline that fits the target enclosure • Layer stack-up and controlled-impedance traces where required • Carefully arranged SMT footprints, silkscreen, and reference designators • Gerber, drill, pick-and-place, and centroid files ready for any mainstream PCB house • Updated BOM wit...

I need a clean, minimalist monogram for my company "whynew" - a brand focused on reselling pre-owned electronics (laptops, tablets, smartphones, etc.). About the brand: whynew encourages people to rethink buying new. The name is a question - "why new?" - and the brand targets a younger, environmentally conscious generation that values smart, sustainable choices without sacrificing style or quality. Design requirements: * The monogram must include the letter "W". Ideally it also incorporates the "N" into a single, cohesive mark, but a strong standalone "W" is acceptable * The design must look modern and professional - not playful or overly decorative * Flat 2D design is preferred, but subtle 3D elements are acceptable as long as the...

...supplier meeting into a clear, productive conversation. Your background in supplier negotiations is essential because we will be discussing prices, minimum order quantities, lead-times and contract terms with electronics manufacturers on the spot. Beyond live interpretation at the booth aisles and over lunch meetings, I will rely on you to put any quotation sheets, technical specs or follow-up emails we collect into polished bilingual documents once we leave the hall each evening. In other words, both verbal and written translation are part of the job. If you already know the electronics supply chain and have handled face-to-face talks at previous trade shows or factory visits, that experience will help us move quickly from first contact to actionable next steps. You wil...

I’m launching a new pair of smart glasses—think Meta Glass, but with our own twist—and I need a standout promotional video that tells the brand story and brings our v...storyboard, source or shoot footage, and weave in tasteful motion graphics or on-screen text where it strengthens the story • Deliver a polished video in 1080p (4K a plus), around 60–90 seconds long, optimized for web and social platforms The style should feel aspirational but authentic, less tech demo and more lifestyle vignette. If you have examples of similar wearable-tech or consumer-electronics brand pieces, share them so I can get a feel for your aesthetic. Final hand-off: editable project files plus the rendered master. If this sounds like your kind of storytelling, let’...

I need a microcontroller-based motor controller for a BLDC motor using Field-Oriented Control (FOC). The system should incorporate encoders as sensors. Key requirements: - Control a BLDC motor - Implement FOC - Utilize encoders for feedback Ideal skills and experience: - Expertise in FOC and motor control - Experience with encoders ...microcontroller-based motor controller for a BLDC motor using Field-Oriented Control (FOC). The system should incorporate encoders as sensors. Key requirements: - Control a BLDC motor - Implement FOC - Utilize encoders for feedback Ideal skills and experience: - Expertise in FOC and motor control - Experience with encoders and microcontroller programming - Background in embedded systems and electronics Please provide relevant work experience in ...

I have a 3-D printed auto-turret from the game Rust, but the internal cavity of the current model is too tight. I need the CAD updated so every electronic I’m using can sit comfortably while the original motor mount remains exactly the same size and position. The parts that must fit are: • Motor (mount stays unchanged) • Mini motherboar...those components require. If an external up-size proves best, I’ll send via email the existing printed pieces for precise measurement. Deliverables • Revised CAD files (STL or STEP) ready for printing • A quick note on the key dimensional changes you made Acceptance The print will be considered successful once the motor slides into its original slot without play and the remaining electronics nest insi...

I am looking for a skilled copywriter to create clear, engaging, and SEO-friendly product descriptions for my catalogue. The ideal candidate should be able to turn technical details into simple, easy-to-understand content that hig...Ensure content is easy to read and customer-friendly • Maintain accuracy in specifications (dimensions, materials, etc.) • Optimize content with basic SEO keywords Requirements: • Experience in product description or copywriting • Strong English writing skills • Ability to meet deadlines • Attention to detail Project Details: • Number of products: [Add number] • Industry: [Example: Fashion / Electronics / Skincare] • Delivery time: [Add deadline] Please include samples of your previous work when applying. ...

Hello, I have an existing electronics store, but I have decided to convert it into a baby products store. I am looking for someone to help with: 1. Redesigning the logo to reflect the new store identity. 2. Modernizing and designing the store layout to be visually appealing and user-friendly. Some additional context: • The store is new and has not generated any sales yet. • The target market is exclusively the United States. I am looking for a freelancer who: • Has experience with Google and TikTok ads. • Is skilled in SEO (Search Engine Optimization) to increase traffic and potential customers. If you have the required experience, please provide your proposal along with examples of previous work. Thank you!

I'm looking for an experienced Arduino programmer to create a microcontroller-based shooting target system. The system will feature 20 targets spread over a wall, with individual LEDs that randomly light up and a sound effect when a target is hit. Key Requirements: - 20 targets with individual LEDs - LEDs randomly lit - ...wall, with individual LEDs that randomly light up and a sound effect when a target is hit. Key Requirements: - 20 targets with individual LEDs - LEDs randomly lit - Arduino-based microcontroller - Sound effect on hit Ideal Skills and Experience: - Proficiency in Arduino programming - Experience with individual LED control - Knowledge of sound integration with microcontrollers - Background in electronics and circuit design Please provide relevant experienc...

PROJECT DESCRIPTION Package E – Embedded Firmware Development Project: Box Capsule 1. PROJECT OVERVIEW Box Capsule is a vehicle-mounted hardware device designed to physically restrict access to a mobile phone while driving. The system operates as a standalone embedded device. Its purpose is to reduce driver distraction by controlling physical access to the phone based on real-world conditions such as motion and user interaction. This is not an app-based solution. All critical functionality must be executed locally on the device. 2. SYSTEM OBJECTIVE The firmware must control a locking mechanism that: * allows the user to insert a phone * detects lid status (open/closed) * detects motion or driving condition * locks the phone when required * prevents access while driving * allow...

We are looking for an experienced PCB Designer / Electronics Consultant with proven expertise in ATEX / IECEx standards to support the design and development of a PCB intended for use in hazardous (explosive) environments. The selected candidate will be responsible for ensuring that the design complies with relevant standards and can successfully pass certification requirements. Scope of Work: Design and review PCB in compliance with: ATEX Directive 2014/34/EU IECEx Scheme IEC 60079 standards (especially 60079-0 and 60079-11 for intrinsic safety) Provide guidance on protection methods (e.g., Intrinsic Safety – Ex i, Increased Safety – Ex e, etc.) Ensure proper implementation of: Creepage and clearance distances Energy limitation and fault tolerance Component selection...

We are looking for an experienced PCB Designer / Electronics Consultant with proven expertise in ATEX / IECEx standards to support the design and development of a PCB intended for use in hazardous (explosive) environments. The selected candidate will be responsible for ensuring that the design complies with relevant standards and can successfully pass certification requirements. Scope of Work: Design and review PCB in compliance with: ATEX Directive 2014/34/EU IECEx Scheme IEC 60079 standards (especially 60079-0 and 60079-11 for intrinsic safety) Provide guidance on protection methods (e.g., Intrinsic Safety – Ex i, Increased Safety – Ex e, etc.) Ensure proper implementation of: Creepage and clearance distances Energy limitation and fault tolerance Component selection...

Technical Blog Writer Required from ECE that is Electronics Background

Electronics Student Intern Required

...concept for a trailer-door security device into a fully working prototype. After a recent theft attempt, I need the system to be rock-solid: every time the doors are opened or tampered with, I want an instant mobile-app notification on my phone. Core functionality • Hardware: combine magnetic sensors for clean open/close detection with vibration sensors for forced-entry or impact events. • Electronics & firmware: select a low-power MCU, integrate the two sensor types, and push data over cellular or Wi-Fi to a secure cloud endpoint. • Mobile app: build one code-base (Flutter, React Native, or similar) so I receive real-time alerts on both iOS and Android. A simple dashboard showing status, last event time-stamp, and battery/connection health is enough for t...

My prototype runs on two independent 360-degree servos that each turn a separate gear train to drive plungers. A 1.68" display and a small vibration motor round out the user interface. Functionally it works, but the mechanics feel rudimentary and the control electronics are still at a breadboard stage. Mechanical scope • Keep the existing architecture but focus on Optimization of current gear system – smoother meshing, tighter tolerances and balanced loads so each plunger actuates cleanly without stalling or backlash. • Verify torque requirements against the present servos; if calculations show a shortfall we can discuss alternate motors, yet the preference is to retain the dual-servo approach. Electrical scope • Redesign the control PCB with Increa...

I need clear, engaging product descriptions for a range of electronics. Each piece should highlight key specs, unique selling points, and real-world benefits in language a non-technical shopper can grasp. Scope • 15–20 products initially, covering items like smartphones, headphones, and smart home gadgets. • 120–150 words per description, SEO-friendly but natural. • Tone: informative yet approachable, avoiding jargon unless it adds value. What I’ll provide • Product names, core specifications, and any brand guidelines I have. • Target keywords and audience insights where available. What I expect • Original copy free of fluff or duplication. • A short meta description (max 160 characters) for each product. • Del...

...tasks on this project. We need someone who is available to work right now (not overloaded with other projects) and who can show daily progress (not take days to do simple fixes). We are also looking for someone who is pro-active and can identify issues in the the code and propose solutions, ideally with minimum guidance from us. This could eventually lead to a long-term collaboration with our electronics team if this project turns out well. Testing will be done on our side because it requires the phone app, but it would really help if you have access to an ESP32 dev kit to test some of the features (using nrfConnect or other app). We can eventually setup a remote test bench connected to the real device if more advanced debugging is required. In your proposal, you must descr...

Local First-Line Support Engineers Needed for Driving Simulators Our driving simulators will soon be installed at customer sites in multiple countries, and we are looking for reliable, locally based engineers who can provide on-site first-line support when needed. This assignment is strictly for ...The role is limited to practical first-line troubleshooting using observation, a multimeter, and common-sense diagnostic checks, so that our headquarters team can determine the next action. When replying, please indicate: Which country or region you can cover Your typical response time for an on-site visit Any previous experience with arcade machines, simulators, motion systems, or related electronics Clear email communication and good photographic evidence are essential parts of the...

...and complete BOM 2. Embedded code (Arduino/ESP32-C, STM32, or similar) with annotations 3. 3D enclosure files (STEP/STL) ready for printing or injection moulding 4. A brief assembly and calibration guide 5. Video or live demo proving the prototype meets the stated functions I will cover prototype component costs once the design is locked. If you already have experience with low-power electronics, level sensing (ultrasonic, pressure, capacitive, etc.), and automated pump control, let’s talk timeline and milestones so we can get this device into field testing quickly....

Veuillez vous inscrire ou vous connecter pour voir les détails.

Veuillez vous inscrire ou vous connecter pour voir les détails.

...Voronoi-pattern plug-in to achieve the organic lattice look I have in mind. Both the exterior shell and the interior liner need attention, as well as cable ducts. Exterior work involves reshaping key contours, applying the Voronoi texture where indicated and adding clean mounting points or slot features that will later accept small electronics. Inside, we must reposition or redesign the padding zones and carve out cavities that leave room for the same electronics without compromising strength. This is an iterative project: after each revision I’ll 3D-print a prototype, test fit, then send you notes so we can refine until everything feels dialed in. Once the master model is approved, I’ll need it scaled or parametrically adjusted to multiple head sizes whi...

I'm looking for an experienced freelancer to handle my Shopify store. The job includes importing electronics products and assisting with SEO. Key Responsibilities: - Manage existing store operations - Import a range of electronics products - Implement and optimize SEO strategies Ideal Skills & Experience: - Proven experience with Shopify - Familiarity with electronics product sourcing - Strong background in SEO with measurable results Please provide a portfolio and relevant experience.

My motor-driven inspection robot already works, but its electronics and code now need a serious upgrade. The mobile unit talks to a control box through a 100-metre twisted-pair cable while a vision camera streams live video, so every watt saved and every microsecond trimmed matters. Phase 1 – Mobile Unit I want the existing PCB completely re-laid to improve thermal behaviour, noise immunity and overall robustness. You will analyse the current board, then redesign it for cleaner power distribution, better signal integrity and easier field service. Schematics, PCB files (Altium or KiCad preferred), BOM and production-ready Gerbers are expected. Phase 2 – Control Box Inside the controller several separate boards handle power, comms and motor control. I need these cons...