Create bootable windows usb linuxemplois

Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Type
Compétences
Langues
    État du travail
    3,464 create bootable windows usb linux travaux trouvés au tarif de EUR

    Bonjour je souhaiterai qu'on m'install les drivers de ma carte mere. En particuler ceux de L4USB le reste fonctiçonne.

    €266 (Avg Bid)
    €266 Offre moyenne
    2 offres
    Installer le drivers USB S'est terminé left

    Bonjour je souhaietrai qu'on m'installe les drivers USB sur mon PC car il sont en 1.0 Merci de m'aider

    €16 / hr (Avg Bid)
    €16 / hr Offre moyenne
    2 offres

    Cet objet à pour vocation d'être branché sur un compteur Linky d'ERDF via le port USB. La surface minimale du module électronique interne est d'environ 8cm^2.

    €100 (Avg Bid)
    €100 Offre moyenne
    2 offres

    je vu écrire un programme en vb6 pour gérer des LEDs d'une interface vb6

    €129 (Avg Bid)
    €129 Offre moyenne
    2 offres

    Bonjour, je recherche un petit programme qui effacera les données de tout clés usb qui se connectera sur des ports usb d'un ordinateur fonctionnant sous windows xp. En clair Mr x branche sa clé sur cette ordinateur et les données de sa clé sont automatiquement supprimé sans message de validation ou autres.

    €54 (Avg Bid)
    €54 Offre moyenne
    5 offres

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    €610 (Avg Bid)
    €610 Offre moyenne
    12 offres

    I will supply an APK that was wrote to work on a native android device with NFC reader and i need to be adapt to an Android device that have a USB NFC reader. i will provide the reader drivers from the USB NFC reader.

    €441 (Avg Bid)
    €441 Offre moyenne
    7 offres

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    €290 (Avg Bid)
    €290 Offre moyenne
    6 offres

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    €16 (Avg Bid)
    €16 Offre moyenne
    6 offres

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €23 (Avg Bid)
    €23 Offre moyenne
    2 offres

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    €26 (Avg Bid)
    €26 Offre moyenne
    2 offres

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    €26 (Avg Bid)
    €26 Offre moyenne
    3 offres

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €45 (Avg Bid)
    €45 Offre moyenne
    3 offres

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €38 (Avg Bid)
    €38 Offre moyenne
    6 offres

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €69 (Avg Bid)
    €69 Offre moyenne
    8 offres

    Project Name Create bootable ISO image files of three OS X installers for use in Parallels Desktop 14 Project Aim The aim of this project is to create three properly and bootable ISO image files for use in the installation of older OS X versions in Parallels Desktop. The benefit of this approach is to have permanent and clean virtual disks (to be kept

    €136 (Avg Bid)
    €136 Offre moyenne
    2 offres

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    €9 - €26
    €9 - €26
    0 offres

    ...Interface UART (3) SPI 1G Onboard flash Micro USB USB 5V Power input ( regulated 3.3 V power to Lora module) BLE Debug port for development 5 LED display for status Notes: 1)We may need to keep instance U11 for cryptoAuthentication. 2)We may need to keep QSPI device, U9, (flash memory) for second bootable memory. 3)Link to useful material: https://www

    €1445 (Avg Bid)
    €1445 Offre moyenne
    10 offres

    This interface will be based on the Cypress EZ-USB chip and will be driven by a C/C++ program running on the PC. The C/C++ program will be written in modular format, with functions for each individual elementary/basic control of the devices that we want to control or monitor. Since this project will be part of a course for student training, all software

    €150 (Avg Bid)
    €150 Offre moyenne
    3 offres

    ...features. 1. An app can get camera feature recursively and create menu. 2. An app can take videos. 3. An app can take photos. Type of freelancer you're looking for - Never stop challenging - Can be manage the project and do the scratch development - iOS developer who has knowledge of UVC(USB video class) and OpenCV ref- [se connecter pour voir l'URL]

    €1104 (Avg Bid)
    €1104 Offre moyenne
    39 offres

    ...PC->HDMI->FPGA->HDMI->Monitor 2) PC->USB-> FPGA 3) The PC will send information to the FPGA and create an overlay on the monitor. This software on the PC could be coded in C++ or C. Example, DrawText(x, y, "Truck #19 ready for shipment.") There are many samples online but my knowledge is too limited to combine USB communication and Drawtext or s...

    €312 (Avg Bid)
    €312 Offre moyenne
    7 offres

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    €207 (Avg Bid)
    €207 Offre moyenne
    12 offres

    1. way to check if there is any USB TOKEN / SMARTCARD with certification. 2. querythe device for some "string" in the description 3. send "PIN" to the device. 4. get certificate to sign document. all writen in DELPHI, can use OpenSSL or PKCS#11 pr PCSC dll or what evere needed. all must be free from any Copyright to any therd side

    €545 (Avg Bid)
    €545 Offre moyenne
    3 offres

    I am looking a source code of MT7601U Wireless USB wifi adapter Windows Driver. If you can develop it or have it, please bid for me. Thanks.

    €3559 (Avg Bid)
    €3559 Offre moyenne
    6 offres

    In order to use Dosbox Emulator on Android devices, we must be able setting the usb port to serial port function, thus, our DOS application will have communication with external serial devices.

    €499 (Avg Bid)
    €499 Offre moyenne
    8 offres
    USB Chargers ID design S'est terminé left

    We are looking for USB chargers ID design,including USB Home chargers,USB Car chargers,Multi-USB charging stations with unique and compact design

    €147 (Avg Bid)
    €147 Offre moyenne
    10 offres

    preciso de um desenvolvedor em ccs compiler para utilizar a biblioteca 16FUSB para criar um teclado USB HID com o pic 16F628A

    €124 (Avg Bid)
    €124 Offre moyenne
    1 offres

    I need an electronic-expert, who can create a circuit and build a prototype of the following device: It should contain a small display. On the display, I wanna show a number from 1-999. I wanna set the number on the device (with simple switch or similiar). The device must be connected with a computer with USB. On the computer, I have a software where

    €1412 (Avg Bid)
    €1412 Offre moyenne
    41 offres

    I am looking for some .Net code that will allow me to reliably send text commands directly to a USB port (not through windows print spooler).

    €346 (Avg Bid)
    €346 Offre moyenne
    7 offres

    Hi. I want to build a smaller version of the fly/mosquito racket/swat and I want to have a charging by USB capability

    €194 (Avg Bid)
    €194 Offre moyenne
    9 offres

    I need you to develop some software for me. I would like this software to be developed using C or C++. Use pic18lf45k50 to be a mass storage usb device with ability to write/append to file using SD card

    €40 (Avg Bid)
    €40 Offre moyenne
    6 offres

    I need you to develop some software for me. I would like this software to be developed using C or C++. To make a pic18lf45k50 appear as a mass storage device with and sd card using mplabx and xc8. with ability to write/append to a file

    €196 (Avg Bid)
    €196 Offre moyenne
    10 offres

    I have my program already now its used usb dongle to control license .And now I would like the license tool able to generate license which able to define number of users , expiredate or unlimited date , and lock my program to use only one computer was defined ( by cpu id )

    €910 (Avg Bid)
    €910 Offre moyenne
    8 offres

    I have an USB hard drive which contains an encrypted Linux LUKS partition whose password I have forgotten. However, I have a list of possible passwords as a text file. One password candidate per line. There are about 100 password candidates in this file. I need you to write a script I can run in Linux that will try to open the USB hard drive, which

    €22 (Avg Bid)
    €22 Offre moyenne
    1 offres

    ...monitor from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or use an available standard USB interface chips. In either case

    €165 (Avg Bid)
    €165 Offre moyenne
    32 offres

    Hello, we have designed a new QR code scanner device. For security reasons we couldn't use a normal USB socket so we redesigned it. So to install the software we need a adapter "USB to our specially designed socket". It has to be a design for manufacturing, so we can 3D print it and use it immediately. I'll send you a file after signing an NDA, how

    €1965 (Avg Bid)
    €1965 Offre moyenne
    46 offres

    Need single USB 3amp ultra fast smartphone charger design with following technical specifications and features: Technical specifications and features: • output voltage: 3.6V to 12V and the maximum output current: 3A or slightly greater than that like 3.1 or 3.4 amp and this power should be 18W (Not cheaper and conventional design like output 5V/3A

    €2174 (Avg Bid)
    €2174 Offre moyenne
    8 offres

    I have a program installed on my desktop and for some reason its not able to detect the usd reader. need someone that can take a look at it remotely

    €57 (Avg Bid)
    €57 Offre moyenne
    1 offres

    I'm struggling to solve issues with my Windows10 system that uses two USB (DisplayLink) monitors. Two problems need solving: 1 - Random artefacts: at times the monitor(s) are not properly rendered (refreshed); 2 - Displays swapping: at times after reboot the two monitors are swapped;

    €173 (Avg Bid)
    À la une Garanti Meilleur concours
    €173
    9 propositions

    ...detailed description of circuit operation Specifications: - usb-c in - 3 voltage rails (plus gnd) out: 3.3v, 5v, 12v. - combined rail supply 1.5A+ - SMD parts - <= US$3.50 components at volume of 1,000 pcs - <= 20mm*40mm. - 0.5-1A charging with under/over protection & low voltage cutoff. - When USB-C wall supply is plugged in, operates off wall supply only

    €343 (Avg Bid)
    €343 Offre moyenne
    21 offres

    Build printed circuit from a blueprint drawing project of the item attached. PCB file requested. Possibile request to build an hardware prototype with USB port (not LPT port like the original): request of MOB Excel file. I already have a PDF file of the original blueprint.

    €170 (Avg Bid)
    €170 Offre moyenne
    17 offres

    Want an app that can store fingerprints of multiple people. Fingerprints to be authenticated in the app Clock in and clock out timestamp stored for every user based on fingerprint detected. This clocking information is synced to an online db (mysql) Developers who have done a similar project in the past are preferred.

    €1096 (Avg Bid)
    €1096 Offre moyenne
    72 offres

    ...FOR GERMAN FREELANCERS/DEVELOPERS ONLY DUE TO THE COMPLEXITY OF THE PROJECT TO AVOID LANGUAGE BARRIERS. Motor/Kamera/Licht-Steuerung Software/Hardware Entwickler gesucht Windows 10 kompatibel Grundsätzliche Funktionalität: Auf einer Metallspindel befindet sich eine oder mehrere Kameras die ein Videosignal ausgeben (ELP, 5MP) mit einer maximal Auflösung

    €33 / hr (Avg Bid)
    €33 / hr Offre moyenne
    3 offres

    ...Application as user interface for dispensing equipment. System • Android Version 4.4.2+ compatibility (may be possible to makes this 6.0+) • Serial read and write using USB OTG and USB to RS232 adapter. • Track usage data • Display always on • Lock Rotation Portrait/Landscape User Interface (Main Activity) • 4 Size Options (identification of selecti...

    €149 (Avg Bid)
    €149 Offre moyenne
    5 offres

    Description: The TFTP ( Trivial file transfer protocol involves the simple file transfer from client to server, which is implemented on port n...authentication is not required, it is developed using UDP protocols, it is mainly used where the server doesn't have disk drive to download the file so it is used to send the bootable files for client system.

    €20 / hr (Avg Bid)
    €20 / hr Offre moyenne
    3 offres

    Design the PCB, provide the correct drivers and fit the PCB dimensions into the enclosure provide by me.

    €130 (Avg Bid)
    €130 Offre moyenne
    27 offres
    Program a USB stick S'est terminé left

    I need USB stick designed to install an app on any smart tv.

    €106 (Avg Bid)
    €106 Offre moyenne
    1 offres

    small software that can manage with canable usb interface.A page with the info from 10 can ID frames. Send 3 types can frame and get results

    €500 (Avg Bid)
    €500 Offre moyenne
    12 offres