Copy linux usb windowsemplois

Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Type
Compétences
Langues
    État du travail
    3,144 copy linux usb windows travaux trouvés au tarif de EUR

    Bonjour je souhaiterai qu'on m'install les drivers de ma carte mere. En particuler ceux de L4USB le reste fonctiçonne.

    €271 (Avg Bid)
    €271 Offre moyenne
    2 offres
    Installer le drivers USB S'est terminé left

    Bonjour je souhaietrai qu'on m'installe les drivers USB sur mon PC car il sont en 1.0 Merci de m'aider

    €17 / hr (Avg Bid)
    €17 / hr Offre moyenne
    2 offres

    Cet objet à pour vocation d'être branché sur un compteur Linky d'ERDF via le port USB. La surface minimale du module électronique interne est d'environ 8cm^2.

    €102 (Avg Bid)
    €102 Offre moyenne
    2 offres

    je vu écrire un programme en vb6 pour gérer des LEDs d'une interface vb6

    €131 (Avg Bid)
    €131 Offre moyenne
    2 offres

    Bonjour, je recherche un petit programme qui effacera les données de tout clés usb qui se connectera sur des ports usb d'un ordinateur fonctionnant sous windows xp. En clair Mr x branche sa clé sur cette ordinateur et les données de sa clé sont automatiquement supprimé sans message de validation ou autres.

    €55 (Avg Bid)
    €55 Offre moyenne
    5 offres

    Small project that falls into corporate blind spot. I am responsible for sustaining project management and I need a solution to replace off-the-shelf serial GSM modems which are no longer supported/available. We would like to utilize Digi Internation ([se connecter pour voir l'URL]) TransPort line of cellular routers for simplicity. They are embedded devices which allow running custom python ...

    €1077 (Avg Bid)
    €1077 Offre moyenne
    13 offres

    I need to link receipt printing of Odoo's POS to an USB Serial ESC command receipt printer on Android (click on a button on a webpage then send the command to the printer), the documentation of the printer has attached below, the SDK (.jar file) will be provided.

    €58 (Avg Bid)
    À la une
    €58 Offre moyenne
    2 offres

    I need to create a unique encrypted usb key (Dongle) to run an application on Centos. You can visit this Link, to have an idea of the product: [se connecter pour voir l'URL] If you speak Spanish, it would be good to treat us, but it is not mandatory.

    €49 (Avg Bid)
    €49 Offre moyenne
    6 offres

    Select parts to fit into small housing for Fan, that we have already. We need controls to match to fan and USB parts, we have a limited space to work with in our fan housing, so the goal is to fit as much of the components into a small as space as possible. We need to have complete selection of parts and documents.

    €472 (Avg Bid)
    €472 Offre moyenne
    26 offres

    I would like to develop a simple USB game controller for Windows. I understand this is very simple to do with hardware such as Arduino atmega32u4. I have successfully created a controller using Arduino Pro Micro, however, Windows reads the controller as Arduino Micro. I would like to hire someone who can write software on a single write microchip,

    €280 (Avg Bid)
    €280 Offre moyenne
    12 offres

    ...technitians that don't know anything about linux. Therefore I need help to create a Bash script for a USB-drive that autoruns on insertion of the USB drive, set proxy settings for apt (/etc/apt/apt.conf.d/95proxies), upgrades the machine and then install software listed below. Script functionality: - Autorun when USB drive with script is inserted in the

    €88 (Avg Bid)
    €88 Offre moyenne
    1 offres

    Just one function Transfer file (e.g. .png or .jpg) to Android SD card via OTG use, this OTG will connect to GPIO of Raspberry Pi to Android device connector via USB OTG. Raspberry Pi will run by Debian system or Ubuntu. It will trigger by one physical button which connected to GPIO. Once GPIO level is high, procedure will be started to transmit files

    €131 (Avg Bid)
    €131 Offre moyenne
    10 offres
    Emulate a USB mouse 9 heures left

    ...connected to the custom device with its own USB cable. Custom device will receive that input and modify the input. The modified input will change it so if the left mouse click is pressed and held, it will continiously click at a set speed in the code. Custom device will then get that changed output following with a USB and it will be connected to the PC.

    €196 (Avg Bid)
    €196 Offre moyenne
    7 offres

    Need C# expert who has experience in data hooking. I want to capture print data which is sent to printer through LPT port or USB. UI is not important, You can show capture data in simple form. I want logic code mainly. if you're confident in this field, please bid for me. My budget is 50$. You must write "Capture" tag at a head of your bid message.

    €97 (Avg Bid)
    €97 Offre moyenne
    6 offres
    Reading PJL in USB printers S'est terminé left

    We need a project that reads USB printer information using PJL commands, @PJL INFO PRODINFO and @PJL INFO PAGECOUNT. The application will only read on USB printers only! No readings will be made on the network printer! The code should be done in Visual Studio so that our programmers can enter the code in our project.

    €397 (Avg Bid)
    €397 Offre moyenne
    9 offres
    Trophy icon Logo for a usb cable company 2 jours left

    I need a 3d logo for a company that seel USB-c cables, it must have a monkey and something that is similar to USB cable. I need a black background and something innovative a project. the name of the website is [se connecter pour voir l'URL]

    €159 (Avg Bid)
    Garanti Scellé
    €159
    97 propositions

    We need a persion who can set up a fax servi...text) We don’t need you to develop this, just need to install and configure a existing software. We try to configure hylafax but could not get it to work. Here is the external USB fax modem we are using: https://www.amazon.com/gp/product/B0013FDLM0/ref=ppx_yo_dt_b_asin_title_o09__o00_s00?ie=UTF8&psc=1

    €17 / hr (Avg Bid)
    €17 / hr Offre moyenne
    3 offres

    I have a HID based USB caller id device which i want to use to get caller id on my pstn and inject the callers number and date and time in mysql database . If you can do that please bid this will be only on centos7 linux environment and it needs to run 24/7 on the server if it fails anytime it needs to try and reconnect or send failur email to admin/root

    €119 (Avg Bid)
    €119 Offre moyenne
    6 offres

    ...setup a Rpi3 with a USB webcam(Not RPiCam) in her studio, that would allow her to record audio/video her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras, that do not work with USB cameras, included

    €143 (Avg Bid)
    €143 Offre moyenne
    9 offres

    Necessito de uma powerbank com as seguintes especificações: - Capacidade: entre 2000 e 3000 mAh - Input: USB-C (e se possível com wireless charging) - Output: USB-C e wireless charging - Dimensões: até 9*5.5*0.5 cm

    €2389 (Avg Bid)
    €2389 Offre moyenne
    19 offres

    I have a Usb Floppy drive and want it to replicate a tone/song imputed to a program [se connecter pour voir l'URL]

    €18 (Avg Bid)
    €18 Offre moyenne
    1 offres

    Hello, i have tinkerboard ...have tinkerboard computer running ARMBIAN OS. i use rdesktop to access my win10 virtual machine on local hypervisor server in local network. i want to connect smartcard and usb device to ARMBIAN and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    €107 (Avg Bid)
    €107 Offre moyenne
    7 offres

    SENARIO: I have a quantity of 40 USB thumb drives. I want to divide them into four groups, A, B C, and D. When I plug ANY of the thumb drives in from group A into ANY of the USB ports on the Pi, I’d like it to play video: /Home/Pi/[se connecter pour voir l'URL], when I plug ANY of the thumb drives in from group B, I’d like it to play video /Home/Pi/[se connecter po...

    €18 (Avg Bid)
    €18 Offre moyenne
    2 offres

    ...for you PCB designers who are up tonight. There is a PCB design already done in Altium Designer that contains a USB-C connector in it. This was a TE Connectivity USB connector. All we need you to do is to swap this connector with a Molex USB-C connector, the Datasheet of which will be supplied. All it takes is running Altium and about half an hour to

    €21 (Avg Bid)
    €21 Offre moyenne
    32 offres

    My wife is currently using her phon...recording I would like to setup a Rpi3 with a USB webcam in her studio, that would allow her to record her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras.

    €215 (Avg Bid)
    €215 Offre moyenne
    10 offres

    Hello Designers I'd like to have my USB stick and a DVD designed. Just need 2 cliparts. Need to be simple

    €18 (Avg Bid)
    €18 Offre moyenne
    8 offres
    Remote usb S'est terminé left

    We want to use usb ports remotely We want a server - client architecture. Server will be a rpi-like device with an usb port. Client will run on windows10 and windows7. Server and client are accessible through LAN. Server and client software should be controlled via API. Main goal of the project is when any usb device is physically attached to pi,

    €143 (Avg Bid)
    €143 Offre moyenne
    2 offres
    Use remote usb S'est terminé left

    We have a sbc box (server) running armbian with usb ports. There is a remote user (client) running windows 10. Client and server are on the same LAN. When we attach an usb device into box, we want it to behave like it is plugged into clients computer. We want a software similar to Virtualhere project.

    €506 (Avg Bid)
    €506 Offre moyenne
    7 offres

    Hello, i have tinkerboard computer running xubuntu 18.04 tls. i use rdesktop to access my win10 virtual machine on server in local network. i want to connect smartcard and usb device to xubuntu and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    €153 (Avg Bid)
    €153 Offre moyenne
    6 offres

    ...old keyboard that was once sold in the us via monoprice and went out of production years ago. I love this keyboard for various reasons, Black cherry mx switches, usb passthrough, modular usb cable, but mainly because as far as i can tell it is the only keyboard in the world which is TKL and has macros (the roccat ryos pro tkl also does but they arent

    €119 (Avg Bid)
    €119 Offre moyenne
    4 offres

    Please see attached file to this project!

    €278 (Avg Bid)
    €278 Offre moyenne
    19 offres
    Illustration for USB Drive S'est terminé left

    We need a line illustration created for this USB drive to show people how the usb opens. We would also like an arrow added showing how the tab with the chip flips up to open.

    €79 (Avg Bid)
    €79 Offre moyenne
    33 offres

    We are building application where we need to connect to hardware with serial port and perform hardware control with node js code. If you have very very good knowledge about node and node serial port then only reply with project. You will be working with remotely with team and hardware with team viewer so you can see how it works. When you apply for this project don't forget to mention &...

    €408 (Avg Bid)
    €408 Offre moyenne
    11 offres
    usb keylogger S'est terminé left

    hi I would like similar or same software that usb kyloggers use where I could load on to my own blank usb devices

    €60 (Avg Bid)
    €60 Offre moyenne
    4 offres
    QT + Android USB HID library S'est terminé left

    Hello, we are looking for an experienced QT and Android developer to develop a small library to communicate with a USB HID device without requiring a rooted phone. The library should be accessible via QT/C++ and provide functions like: - open - listDevices - write (blocking and nonblocking) - read (blocking and nonblocking) - close We require the library

    €202 (Avg Bid)
    €202 Offre moyenne
    8 offres

    ...and it has both a wireless connection and several USB dongles for 4g connection. I would like to proxy via this machine using the IP and then connect to internet via 4g. It has to be anonymous (should not be detected as proxy), reliable and easy to use (i.e. I can proxy into it using ip:port1 for usb dongle 1, ip:port2 for dongle 2 etc.). I want to

    €674 (Avg Bid)
    €674 Offre moyenne
    4 offres

    ...and it has both a wireless connection and several USB dongles for 4g connection. I would like to proxy via this machine using the IP and then connect to internet via 4g. It has to be anonymous (should not be detected as proxy), reliable and easy to use (i.e. I can proxy into it using ip:port1 for usb dongle 1, ip:port2 for dongle 2 etc.). I want to

    €424 (Avg Bid)
    €424 Offre moyenne
    5 offres
    Custom db9 and usb cables S'est terminé left

    Spy cables, custom serial cables and m2m

    €18 / hr (Avg Bid)
    €18 / hr Offre moyenne
    11 offres
    Interfaz USB. PIC - PC S'est terminé left

    Intercambiar datos entre una PC y un PIC 18F4550

    €900 (Avg Bid)
    €900 Offre moyenne
    16 offres

    We need help to print using android app, print through USB (thermal printer or normal printer). Attaching two print format to be printed

    €13 (Avg Bid)
    €13 Offre moyenne
    3 offres

    ...connect, so I will be using 12 of the CD4021BE's and plenty of 10k Ohm resistors to complete it. NOTE: the Arduino Uno does not support the MidiUSB library; I need to connect via usb, NOT a physical midi jack (in other words I eventually want the Arduino to be recognized by the computer as a native midi device). I'm not doing any complicated matrix for the

    €20 (Avg Bid)
    €20 Offre moyenne
    7 offres

    I want a Tiny Core based usb image that does the following. When the usb is in the system. The system will boot into the usb tiny core linux connect to the network via dhcp connect to openvpn have sshd running with key and on port specified port have support for as many file systems as possible. ext2/3/4, fat(32), ntfs, hfs etc.. have the following

    €123 (Avg Bid)
    €123 Offre moyenne
    2 offres

    Hi, I need a device developed for the Xbox One console that would display a message on the screen when it's connected. The device can be based on Atmel, Arduino, PIC, STM - anything that you consider appropriate. Most important is that it pops the message on the TV screen when it's plugged in. Ready to test and troubleshoot together with you.

    €177 (Avg Bid)
    €177 Offre moyenne
    3 offres

    A simple ionic app which can connect external usb camera and take picture from it.

    €130 (Avg Bid)
    €130 Offre moyenne
    4 offres

    Hello, I'm looking for android webrtc external usb/uvc camera developer. I'll explain the problem that I have simple only trough points 1. I want to use Android WebRtc with external usb/uvc camera. 2. For uvc/usb camera I'm using this example [se connecter pour voir l'URL] 3. For Android WebRtc I'm using this example [se connecter pour voir l'URL...

    €513 (Avg Bid)
    €513 Offre moyenne
    12 offres

    i need to integrate external camera to android app.

    €426 (Avg Bid)
    €426 Offre moyenne
    5 offres

    hallo ich will messgeräte (ph-meter, leitfähigkeitsmessgeräte, titratoren) so programmiert haben, dass ich die daten die sie liefern im internet abrufen kann oder mir automatisch irgendwo speichert, sodass ich diese von unterwegs einsehen kann.

    €379 (Avg Bid)
    €379 Offre moyenne
    2 offres

    I need a function that prints a barcode to a EPSON compatible usb receipt printer using Delphi 2010. I would also like to know how to send the ESC commands through to the printer.

    €35 (Avg Bid)
    €35 Offre moyenne
    5 offres

    I would want a Wifi + BLE + USB to CAN converter hardware developed for a product intended to be used for industrial purpose built on ESP32 platform. The hardware should work from voltages ranging from 6 to 32 volts. It would need to show indications on different status via LED. packaging details etc can be provided individually to the consultant.

    €509 (Avg Bid)
    €509 Offre moyenne
    7 offres