Bluetooth microcontrolleremplois

Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Type
Compétences
Langues
    État du travail
    2,000 bluetooth microcontroller travaux trouvés au tarif de EUR
    Power Supply Design S'est terminé left

    A power supply board design required. Board will have an AC input which will be able to work on 115V and 230V mains voltages. Board will have 6 different isolated 24V DC outputs, these outputs...which will be able to work on 115V and 230V mains voltages. Board will have 6 different isolated 24V DC outputs, these outputs will be able to supply 1A of current typically and 1.2A on burst condition. Also there will be 5V 3A and 3.3V 1A non-isolated outputs. There will be 2x 12V Lead-Acid battery connection for backup the mains input. Power supply will be controlled with an integrated microcontroller and will support security functions. Design will be performed with avoiding obsolete parts and will utilise SMD technology. In the first stage, detailed system plan needed prior to elecric...

    €485 (Avg Bid)
    €485 Offre moyenne
    35 offres

    We are striving to have an app where when the user selects a image in the app, 1080 x 2160(vertical) and 2160 x 1080(horizontal). That selected image goes through a bluetooth connection into pcb which then it displays that image on the display. Currently we are stm32, also RGB interface programming will have to be used to enter into our interface converter that converts from RGB interface to mipi dsi 4 lane interface. We have most of the hardware completed minus the necessary parts needed to be discussed by you(firmware developer) and the hardware developer. We are looking to do the process in that both developers have a meeting as soon as the job is set up then we will keep you posted until the hardware developer has adjusted to meet your requirements and has tested out the hardwar...

    €2184 (Avg Bid)
    €2184 Offre moyenne
    7 offres

    You must live in the Western Balkans, Eastern Europe, or Latin America. I'm looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). You do *not* need to currently possess an ESP32. Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You must to be able to work 5 days each week for 1 hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) which you prefer.

    €17 / hr (Avg Bid)
    €17 / hr Offre moyenne
    19 offres

    We are trying to develop a prototype for our idea. We require a skilled worker to help us use the arduino and microphone to consult on our basic design and help us improve it. We would like to pay per hour of consultation. The consultant should ideally be based locally in London and have knowledge of microphones, arduino hardware and circuit design.

    €34 / hr (Avg Bid)
    Local
    €34 / hr Offre moyenne
    2 offres
    Bluetooth Call Recorder S'est terminé left

    Our goal is to build a bluetooth device which can record calls for our CRM app. Build a device that can do the following 1. Connect to a phone as a Bluetooth headset 2. Has an output 3.5mm for connecting a wired headset 3. Answer calls 4. Record calls 5. Transmit recordings to a mobile App via bluetooth 6. Have a rechargeable battery Device should look like a small square box, with 3.5mm port, usb charging port, two led indicators, on / off switch Device should show two bluetooth channels, one for headset (A2DP) and one for connecting to our app. We will need finished product, which is ready to ship to customers.

    €5678 (Avg Bid)
    €5678 Offre moyenne
    7 offres

    I'm looking for python developper with network knoledge and idealy also bluetooth LE Project is to implement gateway from local TCP socket to bluetooth, do some packet transcoding passing packet between both interface Payment is will hourly based, so please provide your hourly rate for this

    €15 / hr (Avg Bid)
    €15 / hr Offre moyenne
    26 offres
    Build mobil hot spot S'est terminé left

    I want to build a mobile hot spot, this hot spot should have internal battery. Sim card slot like any smart phone, antenna 5g, Wireless attena low to midban, midban agression to connect to carrier hdmi connection, two usb connection, and power connection. Should also have an lcd display with software to display battery life, settings options , Bluetooth, antenna connection menu for regular should also have 1TB internal memory. Or external Internally should have Windows 11 software setting Core i 9 processor Similiar to MeLE PCG02 Fanless Mini PC Stick Windows 11 Pro I will attach a picture of it here

    €702 (Avg Bid)
    LDN
    €702 Offre moyenne
    12 offres
    Trophy icon logo design Gemevo S'est terminé left

    ...products. We would like you to take a look in order to visualize the type of products and how the new logo is going to look like on them. About the Brand: Gemevo is a brand specialised in producing electronic devices such as electrical toothbrushes, oral flossers, humidifiers, a large variety of wireless headphones of different styles and uses, smart devices, car devices such as fm transmitters, Bluetooth adapters, alcool tester and many more. Gemevo is offering the customers the safety of every order they place, quick delivery, unique designs of the products and infinite purchasing possibilities. Our customers are receiving the most of our attention and the promise of every order is fulfilled everytime. Note regarding the construction of the logo: We need a symbol with the (...

    €278 (Avg Bid)
    Garanti
    €278
    2449 propositions

    You must live in the Western Balkans, Eastern Europe, or Latin America. I'm looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). You do *not* need to currently possess an ESP32. Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You need to be able to work 5 days each week for 1 hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    €13 / hr (Avg Bid)
    €13 / hr Offre moyenne
    19 offres

    We have an one PCB with ATMEGA32 Controller. We want to be upgrade this with STM32 Controller. DC Power Supply will also be upgraded. Sensor, Communication and Amplification part will also be changed.

    €1953 (Avg Bid)
    €1953 Offre moyenne
    34 offres

    Hi! Thanks for read! i need a single page app for testing bluetooth hardware on the user's phone. PROJECT IMPORTANT NOTE: Don't need publish app on Play store or App store i need ONLY source code for testing correct run! The Ui need to be elementary (Basic element in react native stock library is ok) i need to import your code into mine a simple scrollable list to show trusted devices in range is fine! Programming note for delivery: 1) NOT EXPO! Only React native! 2) Only Js not Js 3) Please use common node Library please :) 4) The app need to run on android and ios. 5) We can use git repository for check code. The scheme is of App is: 1) The app will starts, check permission, if permission isn't ok request permission. 2) Start search (show loading) 3) If s...

    €24 (Avg Bid)
    €24 Offre moyenne
    12 offres

    The objective of the project is to create a device using a microcontroller (Arduino) with a NFC device capable of communicating with a 1st Android Phone. The microcontroller with the NFC device will send a message to the 1st Android Phone and will receive a message from the 1st Android Phone. The microcontroller with the NFC will then send the 2 stored messages to a 2nd Android Phone. The sending and receiving of the messages will be done through the NFC device to be connected to the Microcontroller and the NFC devices of the Mobile Phones. The preferred NFC device to be connected to the Microcontroller is the PN532 and the preferred Microcontroller is the Mega.

    €146 (Avg Bid)
    €146 Offre moyenne
    17 offres
    Arduino code for load sensor S'est terminé left

    get sensor reading on android application via bluetooth

    €11 / hr (Avg Bid)
    €11 / hr Offre moyenne
    2 offres

    I'm working on an academic project where I need to make an automatic connection between a BLE breathalyzer device with custom features. My goal is to make the ESP32 in client mode look for the device's Mac and make the automatic connection, I can make this connection normally through the ble Scan application and bluetooth terminal software, for more details I'm available.

    €170 (Avg Bid)
    €170 Offre moyenne
    17 offres
    Build a video conferencing product S'est terminé left

    Hello, We need to build a video conferencing product that integrates a 4K PTZ (Pan-Tilt-Zoom) camera, 2 HDMI connectors, 2 wireless microphones, and 2 Bluetooth speakers for left and right channels. It should have a Linux-based OS and the user should be able to attend zoom and Microsoft Teams meetings on it. The UI should be controllable from an IR remote which also needs to be developed. Logitech's Rally Bar can be a good reference for this product. Hardware schematic and PCB design & development for the motherboard & other PCBs will be required. Camera Interface: HDMI 4K / USB Resolution : UHD 4K / 1080P 60FPS Optical zoom: 12X Digital zoom: 16X Sensor: CMOS This product will be installed in large meeting rooms to conduct video conferencing. More details are avai...

    €17049 (Avg Bid)
    €17049 Offre moyenne
    3 offres

    The service scanner do a periodical bluetooth scan every 5 minute. For each device found the scanner must store in an array: MAC address, UTC timestamp, RSSI, Raw data (Advertisement Data max 31 bytes and Scan response max 31 bytes) When the scan finish send the array to a TCP socket server. If the server did not acknowledge or the TCP connection to send the array fail, must store the data and try to send it again at the end of the next scan. Must work on Windows 8, 10, 11 I only want the scanner part and not the TCP server which receives the data

    €28 (Avg Bid)
    €28 Offre moyenne
    1 offres

    We have an existing ...Swift. Our software works integrated with Bluetooth. To put it briefly, our own product BLE performs text scrolling according to the data it receives from the 4 buttons on the control. We want new features added to this app. In addition, it is expected to support the uploading of software to APPStore and PlayStore. Applications with at least 5 years of experience in Android Kotlin and IOS Swift platforms/software languages or both will be considered. If you are a Turkish national, please specify. It may vary in working conditions. New features to be added will be discussed during the agreement process. To put it briefly: 1-) Multi-interface language support will be added (10 different languages) 2-) Changing some basic functions. 3-) Fixing bugs in Bluetoot...

    €315 (Avg Bid)
    €315 Offre moyenne
    32 offres

    Required a c code developer for STM 32 microcontroller with GSM/GPRS module , TO operate three phase induction motor, for more information we will discuss in chat box

    €724 (Avg Bid)
    €724 Offre moyenne
    18 offres
    Microcontroller software design S'est terminé left

    Embedded software design and coding for Microcontroller for operation of BLDC motor

    €1088 (Avg Bid)
    €1088 Offre moyenne
    13 offres
    STM32, 4G and MODBUS S'est terminé left

    Hello, I need to design a software that can program an STM32 microcontroller using function block diagram (similar to a PLC) and is capable of storing data on a cloud platform. The device will have 4G module/ Ethernet module to upload data.

    €152 (Avg Bid)
    €152 Offre moyenne
    6 offres

    Summary: Off the shelf micro based control unit using Arduino, etc. Unit takes 2 pulse inputs and interprets to speed, these are 5 volt PNP inputs. Unit has multiple relay outputs for alarms, 4-20 ma analog output, serial output (fixed length ASCII), Ethernet Modbus and Profibus interfaces (slave). The unit has no keypad nor display, programming wil be via bluetooth running an app on IPhone and Android devices. App writing is required. Unit has 2 modes of operation. Stand alone single pulse processing and differential detecting from 2 pulse inputs. Thru Hole and SMT, coding, testing and all drawings and source code.

    €2589 (Avg Bid)
    À la une
    €2589 Offre moyenne
    43 offres

    C, C++ developer required to write control and telemetry software based on ESP32 or STM32 microcontroller. 1. The device must connect to the vending machine using the MDB version 4.2 protocol in SLAVE mode and present itself as a bank card reader. 2. The device must connect to the bank payment terminal using the MDB version 4.2 protocol in the MASTER mode, and present itself as a vending machine. 3. An example of the operation of the device: - the vending machine makes a payment request to the device - the device, depending on the business logic, makes a request for payment to the payment terminal or immediately responds to the vending machine with a refusal. - if there was a request for payment to the terminal, the device waits for a response and, depending on the bu...

    €102 (Avg Bid)
    €102 Offre moyenne
    13 offres
    BLDC Motor S'est terminé left

    Hi Metin A., I noticed your profile and would like to discuss my project with you. I need PCB design for bldc ceiling fan(FOC Control) with microcontroller scripting. Let me know if you can help me out.

    €6 (Avg Bid)
    €6 Offre moyenne
    1 offres
    Tuya WBR3 Wi-Fi Bluetooth S'est terminé left

    I need experienced tuya ioT developer. I need mobile app for AC/HEAT pump this existing AC/HEAT üump is using Tuya WBR3 Wi-Fi Bluetooth chip.

    €719 - €1438
    Scellé
    €719 - €1438
    20 offres
    VR Game Development S'est terminé left

    Hi, I am looking for someone to help with the development of a VR Game. Ideally, you will be experienced in working with Bluetooth integration with VR Headsets. Requirements: - The game will consist of simple, easy-to-implement environment and actions. - Integrate VR Headset( Oculus Quest) with a Bluetooth device. Enable communication between those. - Track hand movements and implement actions based on that. - Analyse and store data on a remote server.

    €3329 (Avg Bid)
    €3329 Offre moyenne
    35 offres

    You must live in the Western Balkans, Eastern Europe, or Latin America. I'm looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). You do *not* need to currently possess an ESP32. Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You need to be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    €16 / hr (Avg Bid)
    €16 / hr Offre moyenne
    25 offres

    The scanner do a periodical bluetooth scan every 5 minute. For each device found the scanner must store in an array: MAC address, UTC timestamp, RSSI, Raw data (Advertisement Data max 31 bytes and Scan response max 31 bytes) When the scan finish send the array to a TCP socket server. Must work on Raspberry 3 and 4 with Python 3.9 at least I only want the scanner part and not the TCP server which receives the data

    €25 (Avg Bid)
    €25 Offre moyenne
    2 offres

    You must live in Albania, Bosnia and Herzegovina, Brasil, Bulgaria, Colombia, Israel, Kosovo, Montenegro, North Macedonia, Romania, or Serbia. No experience is required. I'm looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You need to be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    €14 / hr (Avg Bid)
    €14 / hr Offre moyenne
    13 offres

    You must live in… Albania, Bosnia and Herzegovina, Brasil, Bulgaria, Colombia, Israel, Kosovo, Montenegro, North Macedonia, Romania, or Serbia. No experience is required. I'm looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). You do *not* need to currently possess an ESP32. Although you do *not* need any experience, you must prove to me that you are able to think logically. Normally you must work 1 hour/day (20 days/month). For more information, please see the attachment named… Freelancer.com IoT project using MicroPython on the

    €19 / hr (Avg Bid)
    €19 / hr Offre moyenne
    14 offres
    Vehicle CityPool S'est terminé left

    Hello. I would like to get simple basic Android Studio based Vehicle door Lock and Unlock by Bluetooth system project with user interface. Required functionality. - Use only Android Studio - Using ‘Android Car’ installed in Android Studio project - Application should connect with vehicle Through vehicle’s OBD device Bluetooth connection, device which will be plugged in to specific car. That means application will ask Android device for permission to use Bluetooth. - Application should use database and it could be Firebase - Application needs three(3) User interface Login/Sign up buttons. 1) Car user’s “Scan and go” and 2) car owner’s register vehicle and share vehicle and 3) Admin (my)(Random user can’t Sign up as Admin...

    €10223 (Avg Bid)
    €10223 Offre moyenne
    21 offres

    We have an app for android and iOS, written in react native that issues invoices. We need the app to work with barcode scanners (to read the barcode and choose the product + to read and enter the barcode in the product) as follows: For android: Usb,Wifi,Blutooth barcode scanners. For iOS Wifi, Bluetooth barcode scanners. Barcode read needs to be fast and reliable with connection and other barcode options

    €719 - €1438
    À la une Scellé
    €719 - €1438
    109 offres

    ...3rd party apps such as ForeFlight or Garmin Pilot. Their protocol is called "Connext" and is undocumented and proprietary. I'm seeking someone familiar with the protocols involved in this technology to develop an API that I can use for a personal project. The final delivery will be a sample app that is able to communicate GPS, AHRS, weather, traffic, and flight plan data wirelessly over a Bluetooth connection to a Garmin device using the Connext protocol. The delivered source code should not have any 3rd party dependencies, and can be delivered in C, C++, or C#. I will be able to validate the delivered product on my personal aircraft and garmin equipment, but I am unable to provide any test equipment or any details on how Garmin's Connext API works. Plea...

    €2335 (Avg Bid)
    €2335 Offre moyenne
    15 offres

    Communications between Bluetooth and android app. And save data in local database..............

    €111 (Avg Bid)
    €111 Offre moyenne
    1 offres

    Hi freelancers, I need to upload a App in Apple Store using bluetooth. I use a nodemcu to connect the App but i have a issue They send me the following message: "2.1.0 - Information Needed We are unable to post your app to the App Store at this time because your app has not been authorized by the accessory manufacturer to work with the MFi accessory: Next Steps To resolve this issue, please contact the accessory manufacturer to request your app be added to the MFi Product Plan form. Once the accessory manufacturer confirms that your app has been added to the MFi Product Plan form, please reply to this message. When we receive your reply with this confirmation, we can proceed with the review. We do not require a new binary. If you have not yet provided the accessory&#...

    €164 (Avg Bid)
    €164 Offre moyenne
    13 offres
    obd pcb design + firmware S'est terminé left

    hi everone this is not a small job i need a pcb firmware designer to design a pcb for obd2 icluded bluetooth wifi usbc etc i have all the requirement but i need someone who is competent and has done in the past something like this with can canfd flexray protocols etc pls dont waste time to require what and who if you dont have a clue what iam talking about thank you ps nda and ip will be required and payment is done after testing the pcb and firmware

    €2232 (Avg Bid)
    €2232 Offre moyenne
    34 offres
    Chess station p S'est terminé left

    Hi I need 2 android tablets to be used to implement a 2 player chess game. One tablet for black and one tablet for white. The 2 tablets must communicate using Bluetooth. The android NDK should be the most appropriate development platform. Thanks

    €565 (Avg Bid)
    €565 Offre moyenne
    24 offres

    First time your in your car you should register a bluetooth device - This is your "car" Then I Need a small test app that can run even in background so we at any time gets a notification and open the app - We need this for IOS and we use ReactNative - This is only a test so we can see if this is possibly or not.

    €192 (Avg Bid)
    €192 Offre moyenne
    15 offres
    Omni-directional spherical robot. S'est terminé left

    The project is about the design and fabrication of a small-sized spherical robot. The Design and Fabrication process has been completed but needs someone to write a code in Arduino. I am using TinyPico as my microcontroller, Pololu DRV8835 dual motor driver, Pololu AltIMU v5 IMU sensor, 160 mAh Lipo battery, and a small brushed DC motor from Portescap motors. I need to use the Pololu IMU sensor to control my two-brush DC motor to maneuver my robot to move in a Straight line and circle. Also, It has needed to be wirelessly controlled.

    €158 (Avg Bid)
    €158 Offre moyenne
    12 offres

    Hi Sardar Hasnain A., I am reaching out for a new project im in need of assistance regarding python code to link speech api with tm4c123 microcontroller

    €950 (Avg Bid)
    €950 Offre moyenne
    1 offres
    OV9281 DVP to microcontroller S'est terminé left

    I need to interface to the OV9281 CAMERA SENSOR using the DVP interface on the sensor ideally using the SAM S70 but I am open to any microcontroller of your choice, but the source code must be written in C enabling me utltimately to port it to the SAM S70

    €515 (Avg Bid)
    €515 Offre moyenne
    17 offres
    Need Electrician In New Delhi S'est terminé left

    I need an Electrician who knows the microcontroller as well to visit our site and implement the things will explain via video call. He should be good in Urdu or English for communication. Must be from New Delhi to visit to our site.

    €7 / hr (Avg Bid)
    €7 / hr Offre moyenne
    1 offres

    Hello, I have an Ionic project on Cordova that I need help updating. It's Android-only, because for iOS we have native code. I've done some plugins and updates myself, currently running on cordova-android@10.1.2 but the Diagnostics native plugin and Bluetooth connection seems to not work correctly, plus some people have problems on newer phones, like connecting to Bluetooth or swiping to change a page in the app. My goal is to update this project/app to the latest versions or as close as possible to latest versions of nodejs, npm, ionic, cordova, android studio, gradle, maybe java and whatever else is there, and all plugins of course. In hope that it will solve current issues of users. I will give access to the bitbucket repo. Attached is the pictures with the v...

    €14 / hr (Avg Bid)
    €14 / hr Offre moyenne
    32 offres

    this is a tiny bluetooth touchpad, for using it on a finger like a ring. i need someone to make the pcb that contains at least. - usb female charger. - battery - tiny light that indicates on/off. - bluetooth. more details in the picture. any help is welcome.

    €158 (Avg Bid)
    €158 Offre moyenne
    24 offres
    Trophy icon Jaw Monitor S'est terminé left

    ...facial hair, on the temple (circle location). See face location attachment. The sticker itself can be skin tone or any color you choose or transparent exposing the electrodes. The sticker will be attached via a thin wire (can be any color or transparent sheath with silver colored wire) to a small amount of electronics that will be used to receive and transfer signals to the user's phone via Bluetooth. The user will use this device during the day and it will need to be comfortable to be worn for up to 12 hours. We are initially considering housing the electronics behind the ear in a similar manner to a wireless sports ear bud clip i.e. without the actual ear bud. See attached photo of a Power Beats Pro Bud for reference. However the point of this competition is to find th...

    €163 (Avg Bid)
    À la une Garanti Scellé Meilleur concours
    €163
    23 propositions

    We need a Android application which will receive Ibeacon ,kbeacon ,nbeacon data . Data may contain temperature and humidity And needs to be shared in realtime. The first Application is just a tool to passively listen to ble beacon and this it doing in the background .The Application must start at boot .And use the mobile resources gracefully . The System must record and uoad the data realtime and update central server Our website development scope is mentioned in this link Similarly we will require for admin dashboard

    €480 (Avg Bid)
    €480 Offre moyenne
    16 offres

    I'm looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). You need to live in the Western Balkans, Eastern Europe, or Latin America. Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You need to be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    €10 / hr (Avg Bid)
    €10 / hr Offre moyenne
    15 offres

    I have a bluetooth remote controller, which is based on BT04-E Module. I have add my Saleac logic analyzer (Software Version 2) and record some datas in different positions, e.g. when the controller is starting & connecting, normal, when no button was pressed, when one joystick was pressed in one direction etc. Now I'm looking for someone who can create a decode scheme to be able to send datas from another Bluetooth device to the receiver and control it.

    €20 (Avg Bid)
    €20 Offre moyenne
    4 offres

    ...need any experience but you must prove to me that you are able to think logically. You will normally work 1 hour/day (20 days/month). ✻ THE PROJECT ✻ You do *not* need an ESP32 (which is similar to Arduino). You will help me build a consumer IoT (Internet of Things) product using MicroPython on the ESP32. MicroPython is a subset of Python used to program microcontrollers. ESP32 is a microcontroller (similar to Arduino) but ESP32 is generally better and more powerful than Arduino. ✻ DAILY PAYMENT ✻ I will pay you each day for every hour you work with me. ✻ WORKING DAYS AND TIMES ✻ You will normally work 1 hour/day (20 days/month) for one hour on Sunday, Monday, Tuesday, Wednesday and Thursday at a time that is convenient for you. ✻ PAYING YOU TO LEARN ✻ No. Yo...

    €10 / hr (Avg Bid)
    €10 / hr Offre moyenne
    27 offres
    Bluetooth speaker S'est terminé left

    We have prototyped mdf rectangular enclosure. We need services for its ergonomics (aesthetic look) parallel to other leading brands in market.

    €99 (Avg Bid)
    €99 Offre moyenne
    9 offres

    I want this to be a pocket sized device with a Led display similar to that of a deoth watch. I want it to disconnect a Bluetooth device of my choice from all other connections and allow my phone to connect to it. I would also like for it to put the device in pairing mode if that is possible.

    €127 (Avg Bid)
    €127 Offre moyenne
    9 offres