Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Type
Compétences
Langues
    État du travail
    10,524 arm modbus travaux trouvés au tarif de EUR

    JE CHERCHE QUELQU'UN AYANT DE SOLIDE BASE POUR ELABORER UN PROTOTYPE A BASE DES COMPOSANTS ARDUINO recuperation des datas de la sonde par modbus; comparaison des valeurs a des seuils, affichage de valeurs sur ecran LED et alarmes sur contact secs LEDS

    €1978 (Avg Bid)
    €1978 Offre moyenne
    11 offres

    Nous développons notre réseau de bornes de pressing en mode drive, qui permet aux usagers de déposer leur linge 24/24 7/7 afin qu'il r...installé sur la borne. Nous souhaitons faire évoluer l'appli web qui a été développée autour du framework Sylius ; Les évolutions concernent notamment la prise en compte des nouvelles fonctionnalités de la borne, sa communication avec une API elle-même reliée à un module Modbus permettant le pilotage des composants mécaniques de la borne (moteurs, sondes, vérins...). Les développements seront faits en étroite collaboration avec le chef de projet et les équipes travaillant sur la partie automatisme et sur l...

    €41 / hr (Avg Bid)
    €41 / hr Offre moyenne
    13 offres
    epango EMS FL S'est terminé left

    ...d'une personne capable de mettre en place une gateway pour interfacer une plateforme Existante. Cette plateforme permet d’interagir avec des systèmes à travers du Modbus, systèmes de type Batterie, onduleur, panneau photovoltaïques, compresseur, etc … La réalisation : On envisagerai de partir sur un raspberry avec les drivers Modbus. L’idée est de mettre en place un serveur web (nginx) avec du node js pour exposer une api. On envisage une route par device et par ordre. On attend donc comme livrable - une plateforme qui prendra la forme d’un boitier rapsberry et qui exposera de manière sécurisée une API et un service modbus - Mise à jour possible (via du docker par...

    €1295 (Avg Bid)
    €1295 Offre moyenne
    10 offres
    Développement Python - Modbus S'est terminé left

    Développement Python - Modbus Bonjour, Pour un nouveau projet, je dois récupérer le niveau d’un plan d’eau et l’envoyer à un bateau. Sur le bateau, un logiciel récupéra la valeur pour permettre un forage dirigé. La transmission radio devrait se faire avec des modems Atim ARM/868. Il nous manque toute la gestion des requêtes Modbus. Est-ce que vous pouvez nous développer un programme en Python pour : • Lancer une requête Modbus au capteur Vega, en utilisant une librairie : • Lire la valeur du capteur, certainement en hexadécimal, • Traduire la trame Modbus et la mettre à disposition d’un PC sous format Excel, csv, ou autre format ...

    €489 (Avg Bid)
    €489 Offre moyenne
    7 offres

    Faire un programme en langage arduino pour acquérir en temps réel, de façon périodique, les mesures électriques faites par un compteur d’énergie 1- en acquisition via le wifi de la carte arduino 2- en acquisition via la liaison filaire RS485 MODBUS RTU piloté la carte arduino

    €284 (Avg Bid)
    €284 Offre moyenne
    5 offres
    Systeme embarqué S'est terminé left

    Projet: -Carte avec microncontrolleur: TI AM5728 2×1.5-GHz ARM® Cortex-A15 -Acquisition de données. -Commande de relais. -Ecran tactile. Notre besoin: -Configurer la carte TI AM5728 2×1.5-GHz ARM® Cortex-A15 afin de pouvoir utiliser les gpios pour connecter des capteurs, relais. -Développer code en C ou Python. -Créer interface graphique sur écran tactile, bouton marche/arrêt relais, visualiser les données de capteurs. Délai de réalisation: 1 mois

    €11 / hr (Avg Bid)
    €11 / hr Offre moyenne
    1 offres
    Sesame EveryGates S'est terminé left

    Mesdames, Messieurs, Nous développons une solution de cybersécurité permettant à deux dispositifs de communiquer, de s’authentifier et ainsi d’améliorer la sécurité des s...//) o Les fonctionnalités d’envoi et de réception doivent pouvoir être appelées par d’autres fonctionnalités. - Développement des fonctionnalités UX - o Suivant le document joint. - Profil du (de la) freelance - o Compétence en langage C o Expérience minimum de 3/5 ans dans les systèmes embarqués o Expérience dans le développement de driver NFC. o Expérience dans la programmation ARM. Budget du projet : 1700 €. Mer...

    €1570 (Avg Bid)
    €1570 Offre moyenne
    8 offres
    DevOps / Data Engineer S'est terminé left

    ... Île-de-France, France (gare de St Quentin en Yvelines) ; Des déplacements à Issy les Moulineaux sont à prévoir. Début de la mission ASAP : Flexibilité maximum 2 à 3 semaines Durée de la mission : 3 mois avec possibilité de renouvellement Profil Recherché: DevOps avec 2 à 4 ans d'expérience de dev ou data engineer qui a déjà fait de la mise en prod. Une expérience sur Azure Data Factory, Azure ARM, Azure CosmosDB, Azure Functions, git, VSTS, C#, SQL, NoSQL (documentDB) sont obligatoire ; Python, Azure Event Hub, SSIS, Docker, sont des plus. TJM : 600€ Mission : La DSI France a pour mission d’industrialiser puis opérer un POC data science autours ...

    €631 (Avg Bid)
    €631 Offre moyenne
    3 offres

    La finalit...courants électriques communicant en Modbus sur une page web. La seule constante est le capteur de courant qui est déjà défini. Projet en deux parties: -Hardware: Le système d'acquisition doit être le plus simple possible, par exemple Raspberry-pi avec carte usb/modbus ou Arduino avec systeme compatible modbus... L'ensemble doit être équipé d'un modem GSM afin de pousser les données sur un serveur ftp (ou autre en fonction des propositions). -Softwares: Réalisation d'un serveur SQL pour les données collectées et d'une page web simple pour afficher les données avec mise à jour au moins deux fois par jour. Le développe...

    €2914 (Avg Bid)
    €2914 Offre moyenne
    14 offres
    VHDLFPGa/c++/avr/arm S'est terminé left

    VHDLFPGa/c++/avr/arm

    €461 (Avg Bid)
    €461 Offre moyenne
    7 offres
    s7-1200 S'est terminé left

    conexion via modbus s7-1200 y un siemens lmv5

    €314 (Avg Bid)
    €314 Offre moyenne
    7 offres

    Je souhaite implémenter sur un microcontrôleur genre ARM un navigateur WEB en mode pleine page. Ce navigateur devra être purement une fenêtre d'affichage de la page HTML et devra supporter java script. Il devra être dénué de tout module supplémentaire et de tous éléments de navigation. Lors de son lancement, il se connectera à une URL fixe.

    €2089 (Avg Bid)
    €2089 Offre moyenne
    5 offres

    ...of a 'grow box,' about waist high (so harvesters don't have to bend over), being tilled by a machine that has it's metal 'rake' covered by a model horse with a 'plow' tugging behind. Basically I envision a long 'grow box' to grow crops in with a label like 'épinards' and filled with soil that needs tilling/plowing before each planting. Instead of the boring old mechanical arm look I would want the bottom of the mechanical arm tilling the soil to be covered by a model horse with plow and 'farmer' to make it look adorable and artistic. It's just an idea to promote vertical farming. Maybe some 30-45 sec. video to be promoted on YouTube or some other site(s). Que pensez vous ? Maybe we can get so...

    €143 (Avg Bid)
    €143 Offre moyenne
    2 offres

    Bonjour, je souhaite faire développer une application sous Ios. Elle consiste à piloter un automate avec le driver Modbus TCP. L'étude est faite, je connais le nombre de pages (5) et il y a entre 1 et 6 commandes par page. L'iphone ou ipod dialogue via le réseau Wifi au travers d'un routeur sur lequel est connecté au routeur via un câble Ethernet Si vous êtes intéressés, je peux vous donner plus d'éléments ( étude, vues d'écran d'une application similaire) pour établir votre devis, sachant que le délai est de 3 semaines. Cette première application est à développer pour un prototype, elle évoluera par la suite dans le...

    €3010 (Avg Bid)
    €3010 Offre moyenne
    6 offres

    J'ai besoin de 3 articles de 600-750 mots chacun, voici les sujets : - Le dice Summit 2015 présentation - événements - les entre...prolifération exemples comme sur Comment Google contrôle les nouvelles applications des développeurs... - ARM Cortex a72 - Nouveautés annonce des nouveaux processeurs CPU et GPU prévus mi 2016 - Présentation de ARM - les attentes pour ces processeurs... , , Présenter aussi les derniers processeurs ARM à titre de comparaison. Je libère des fonds à chaque article soumis.

    €93 (Avg Bid)
    €93 Offre moyenne
    5 offres

    Serial communication windows PC App for data monitoring, meter configuration, data upload and download for electrical power meter. The power meter has a modbus RS232, RS485 protocol. Additional information can be provided.

    €121 (Avg Bid)
    €121 Offre moyenne
    5 offres

    The aim is to design and build a more compact, usable and cheaper pick & place robotic arm using PIC16F877A microcontroller for educational purposes.

    €11 / hr (Avg Bid)
    €11 / hr Offre moyenne
    5 offres
    penitentiary crew 6 jours left

    I want a cartoon drawing of a big muscle-built prisoner/ inmate to be the face and symbol for a possible t-shirt line. I want him to be grumpy looking but intimidating. and funny. I am including some example. I want to inclu...muscle-built prisoner/ inmate to be the face and symbol for a possible t-shirt line. I want him to be grumpy looking but intimidating. and funny. I am including some example. I want to include the pin stripes and ball and chain. I will want this guy in different type scenarios to set the image for each different topic. Example Our guy big muscle guy sitting on a prison cell bed with his arm around another skinny prison inmate over exaggerated squeezing him closely and the skinny guy looks real scared. The caption for this shirt "Besties for the Stay&...

    €77 (Avg Bid)
    €77 Offre moyenne
    41 offres

    I would like to get 3d model easy for 3d printing (preferably without supports). I want model of a guy (something simmilar to models from attachments) with a raised arm with a clenched fist (fist in attachment). Whats more the guy should have the inscription "3DPOWER". I need transfer of copyright of that model.

    €42 (Avg Bid)
    €42 Offre moyenne
    32 offres
    American flag vertical 5 jours left
    VERIFIÉ

    ...shape("turtle") # flag height to width ratio is 1:1.9 flag_height = 250 flag_width = 475 # starting points # start from the first quardant, half of flag width and half of flag height start_x = -237 start_y = 125 # For red and white stripes (total 13 stripes in flag), each strip width will be flag_height/13 = 19.2 approx stripe_height = flag_height / 13 stripe_width = flag_width # length of one arm of star star_size = 10 def draw_fill_rectangle(x, y, height, width, color): (x, y) () (color) TeenageMutantNinja.begin_fill() (width) (90) (height) (90) (width)

    €41 (Avg Bid)
    €41 Offre moyenne
    9 offres
    Full sleeves -- 2 5 jours left

    Hi! Was just curious if you’d be interested in drawing two sleeve tattoos for me? One arm would be Autumn transitioning into Winter. So Autumn colored leaves, pumpkins into snowflakes and Christmas. The other sleeve would be Spring transitioning into Summer. So flowers with bees. A bluebird and cardinal into like sunflowers and sunshine. I would need this by October. Would this be something you’d be interested in doing? And how much would you charge?

    €84 (Avg Bid)
    €84 Offre moyenne
    30 offres
    Full sleeves 5 jours left

    Hi! Was just curious if you’d be interested in drawing two sleeve tattoos for me? One arm would be Autumn transitioning into Winter. So Autumn colored leaves, pumpkins into snowflakes and Christmas. The other sleeve would be Spring transitioning into Summer. So flowers with bees. A bluebird and cardinal into like sunflowers and sunshine. I would need this by October. Would this be something you’d be interested in doing? And how much would you charge?

    €93 (Avg Bid)
    €93 Offre moyenne
    34 offres

    Vintage Light bulb w/vintage style socket holder and fabric twisted wire and plug. The bulb and socket will be either on the inside of my forearm or outside and the cord will wrap around my arm and the plug will be on the opposite side of the arm, depending on placement. The tattoo will be black and white except the lamp cord which will likely be red/white or the color in the picture provided.

    €31 (Avg Bid)
    €31 Offre moyenne
    5 offres

    PCB design, manufacture and firmware programming for a heating controller. It will involve multiple inputs and outputs, both digital and analogue, NTC,0-10v, pulse, CT, on-off, power supply, separate high quality touch screen controller, 8 gig SD storage, Modbus master, Lora, Zigbee (connection to Sonoff sensors), Wi-Fi and LAN. It must connect to a website for analysis of data and the ability to upload data and download instructions and update the firmware through the internet. The project will also include the development of the firmware, website apps ect. I do have a precious version written in C as an example. A full description of the firmware will be supplied after a NDA is signed.

    €3145 (Avg Bid)
    €3145 Offre moyenne
    46 offres

    I am looking for a tattoo artist who does small, dainty, fine line work. For this particular tattoo I would like very small flowers all up and down my arm. 4-6 different flowers on upper and lower arm. Very similar to reference photos, but different types of flowers.

    €328 (Avg Bid)
    €328 Offre moyenne
    68 offres
    James’s tattoo 3 jours left

    I would like help creating a tatto that involves the quote shown under an ace and a king with the steps leading up to a clock and for the tatto to run up my arm

    €105 (Avg Bid)
    €105 Offre moyenne
    16 offres

    I would like help creating a tatto that involves the quote shown under an ace and a king with the steps leading up to a clock and for the tatto to run up my arm

    €83 (Avg Bid)
    €83 Offre moyenne
    12 offres

    My girlfriend's mother passed away last week and during the burial at the ceremony, a lady bug landed on my girlfriend's arm. The lady bug had always been a connection between my girlfriend, her sister and her mother. My girlfriend's birthday is coming up in a couple of weeks (July 17th) and was hoping to get a touching painting done to depict a lady bug and capture the memory of the day that lady bug landed on her arm. Impressionism is the style I'd prefer. Other notes include being able to capture the lady bug as the primary feature of the piece but also capturing the connection of the lady bug to the relationship between my girlfriend, her sister and her mother as a secondary feature.

    €335 (Avg Bid)
    €335 Offre moyenne
    47 offres

    Hi Mojtaba I am looking for an expert in Modbus. Right now, I am considering to build a Modbus TCP/IP device. But I need advice on it. Will you be available as a consultant? Best regards Georg

    €20 / hr (Avg Bid)
    €20 / hr Offre moyenne
    1 offres

    Hi Rohan I am looking for an expert in Modbus. Right now, I am considering to build a Modbus TCP/IP device. But I need advice on it. Will you be available as a consultant? Best regards Georg

    €22 / hr (Avg Bid)
    €22 / hr Offre moyenne
    1 offres

    Hi Umair I am looking for an expert in Modbus. Right now, I am considering to build a Modbus TCP/IP device. But I need advice on it. Will you be available as a consultant? Best regards Georg

    €20 / hr (Avg Bid)
    €20 / hr Offre moyenne
    1 offres

    Hi Amandeep M., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Do you have availability to start immediately? It is for. 50m3 round steel silo with a bin sweep arm driven at base to unload the silo.

    €10 / hr (Avg Bid)
    €10 / hr Offre moyenne
    1 offres

    Read/write 24 Modbus register(40001 to 40004) in quectel m66 uart port 3 and send that data to thethings io with source code

    €365 (Avg Bid)
    €365 Offre moyenne
    7 offres

    We need somebody to make xmrig (or any other crypto mining tool) work with our ARM CPU hardware with MALI GPU. We will give you SSH access to the Linux machine, the rest you have to you do on your own. Delivery will be a working (proven!) xmrig (or other) mining tool that is shown to be using the device's GPU.

    €483 (Avg Bid)
    €483 Offre moyenne
    15 offres

    You are given the following ten words for the game: 1. HELLO 2. FUNNY 3. MICROWAVE  4. GALAXY 5. QUIZ 6. ICEBOX 7. JACKPOT 8. ZOMBIE 9. LETTERS 10. TECHNIQUES You can list the 10 words in an array in the program and choose a random word from the array. The player has six chances to guess the letters for each game. Valid inputs of the game are from A-Z or a-z. I'll upload a pdf providing more information about the project.

    €72 (Avg Bid)
    €72 Offre moyenne
    3 offres
    PLC to microcontroller with RS 485 S'est terminé left

    I have 2 PLC,s communicating with wireless Modbus RS 485. Slave requires minimal code measuring up to 30 PPS, battery voltage a latching relay and possible count reset command. My intention is to eliminate the Slave PLC. I'm looking for someone who can help me with: (1) I have programs written into 2 PLC,s 1 Master and 1 Slave they are linked via RS 485. (2) They communicate through 2 RS485 wireless transceiver,s The Slave PLC has got a very simple program in it . My task is to move the program in the Slave PLC into a microcontroller. I'm presently using an Arduino UNO for the task I've got the majority of the coding done. In closing, I need someone who has SPECIFIC knowledge in IDEC PLC,s and Arduino microcontrollers.

    €22 / hr (Avg Bid)
    LDN
    €22 / hr Offre moyenne
    35 offres

    You are given the following ten words for the game: 1. HELLO 2. FUNNY 3. MICROWAVE  4. GALAXY 5. QUIZ 6. ICEBOX 7. JACKPOT 8. ZOMBIE 9. LETTERS 10. TECHNIQUES You can list the 10 words in an array in the program and choose a random word from the array. The player has six chances to guess the letters for each game. Valid inputs of the game are from A-Z or a-z. I'll upload a pdf providing more information about the project.

    €73 (Avg Bid)
    €73 Offre moyenne
    9 offres

    You are given the following ten words for the game: 1. HELLO 2. FUNNY 3. MICROWAVE  4. GALAXY 5. QUIZ 6. ICEBOX 7. JACKPOT 8. ZOMBIE 9. LETTERS 10. TECHNIQUES You can list the 10 words in an array in the program and choose a random word from the array. The player has six chances to guess the letters for each game. Valid inputs of the game are from A-Z or a-z. I'll upload a pdf providing more information about the project.

    €582 (Avg Bid)
    €582 Offre moyenne
    2 offres

    Tattoo design for a right arm full sleeve including a cover up in the shoulder area

    €233 (Avg Bid)
    €233 Offre moyenne
    1 offres

    We have 4 servo robot arms, we have 1 color sensor,

    €18 (Avg Bid)
    €18 Offre moyenne
    19 offres
    Object Detection S'est terminé left

    Object tracking with robotic arm moments hand tracking

    €98 (Avg Bid)
    €98 Offre moyenne
    14 offres
    Half sleeve tattoo S'est terminé left

    I want to get a half sleeve tattoo (from hand to elbow area). I know what I want on my tattoo I just need a good designer to make it happen for me. I want lion’s eyes on the outside of my forearm facing away from my body. I want some smaller eagles incorporated that represent freedom. And I want a rose kind of in the middle of my arm facing me. It would be the easiest to talk to a designer so I can verbally explain exactly what I want and the theme that I’m looking for :)

    €76 (Avg Bid)
    €76 Offre moyenne
    42 offres
    Server app for figure motion. S'est terminé left

    Need a server app , that serves a webpage that renders a standing skeletal person making arm motions. The pitch, yaw and roll timestamped samples will be uploaded as a csv file or entered on the page. The app or script will read the csv file and create arm motion on the webpage. There will be 4 views of person on the page : front/back and 2 sides Control buttons: Play, Pause, Reset, Go Deliverables : 1.) Source Code/Scripts and install steps 2.) Sample input csv file Platform : Either Debian/Ubuntu or Android Full details on request.

    €198 (Avg Bid)
    €198 Offre moyenne
    24 offres
    I need a tattoo designer S'est terminé left

    I would like my moms name in cursive with her date of her passing, inside of a ocean wave. (Lolita 5'16'22). I. Would also like my wifes name in cursive in a rose in a cloud of bandana print. (Shanease). These are both for my left arm in between my wrist and elbow.

    €78 (Avg Bid)
    €78 Offre moyenne
    53 offres

    We need somebody to set up OpenCL and OpenGL on our Linux computer. It is an ARM-based machine with a MALI 450 GPU. Linux 20 is already installed and running. We will provide you SSH access to the computer plus a video stream of the machines output, so you can work remotely and see the output. What the deliverables should be: - We will supply a number of OpenGL demo's. These should run on the HDMI output, when started from SSH. - Clappr video player should be installed and should be able to play videos on the HDMI output, using the GPU, when started from SSH terminal. - lolminer (or similar) should be installed and should work with GPU support. - Documentation should be included to set up all of the above on other identical devices.

    €151 (Avg Bid)
    €151 Offre moyenne
    5 offres
    6 axis industrial robot arm S'est terminé left

    Hi Sridhar S., How are you ? I have a project to design an a 6 axis industrial robot arm, Would you be interested in learning more about it ? The budget is just a place holder. Thanks

    €7 (Avg Bid)
    €7 Offre moyenne
    1 offres
    6axis robot design S'est terminé left

    Hi Umair A., How are you ? I have a project to design a 6 axis industrial robot arm, Would you be interested in learning more about it ? The budget is just a place holder. Thanks

    €7 (Avg Bid)
    €7 Offre moyenne
    1 offres
    Data Logger S'est terminé left

    Hi, we wish to develop a Desktop software based on Xojo for our Data Logger product. This will give input in Modbus RTU to the PC and data has to be stored for all channels, alerts, alarms, digital inputs etc. An Excel/CSV file will have to be generated for the temperature based on date range, or alerts that have happened. If user has knowledge of CFR-21 compliance it would make the project much easier.

    €792 (Avg Bid)
    €792 Offre moyenne
    4 offres
    Project for Aya K. S'est terminé left

    Hi Aya K., How are you ? I have a project to design an a 6 axis industrial robot arm, Would you be interested in learning more about it ? The budget is just a place holder. Thanks

    €7 (Avg Bid)
    €7 Offre moyenne
    1 offres
    Project for Usman Z. S'est terminé left

    Hi Usman Z., How are you ? I have a project to design an a 6 axis industrial robot arm, Would you be interested in learning more about it ? The budget is just a place holder. Thanks

    €7 (Avg Bid)
    €7 Offre moyenne
    1 offres