Mes recherches récentes
Filtrer par :
    État du travail
    2,428 altium orcad travaux trouvés au tarif de EUR
    routage pcb S'est terminé left

    je cherche quelqu'un pour me realiser le routage sur altium

    €33 (Avg Bid)
    €33 Offre moyenne
    8 offres
    Route my DDR4 DIMM module 4 jours left

    ...1) Complete schematic design in Altium CircuitStudio 2) Complete footprint design in Altium CircuitStudio. The DDR4 ICs' footrpint pads are 0.35mm in diameter. 3) A list of signal classes (as a screenshot from Altium Designer, since I do not have a copy of the software) 4) Complete SPD programming kit - so that we can test the manufactured board immediately. I have not done any fanout or rules configuration, since I do not think that Altium CircuitStudio will cope with the length matching and parallel multi-routing properly - specifically for a DDR4 project requirements. What I need now is the following: 1) Route the PCB on 6 layers as per the JLCPCB capabilities. Note: I expect that the freelancer has a legal copy of Altium Designer. Exportin...

    €1412 (Avg Bid)
    €1412 Offre moyenne
    23 offres

    We want a core board design on altium, that works with Firefly Ubuntu image. Its pin will have eth, csi, usb 2.0, usb 3.0, PCIE. When design is finished we need to produce PCB and put components on board and see if the design works This is the exact board design that we want - And it needs to work with board firmware -

    €2771 (Avg Bid)
    €2771 Offre moyenne
    30 offres
    pcb design for STM32wb55 board 23 heures left

    i need to design 2 pcb board laid out around an STM32WB55 microcontroler , we need first to make schematics under ALTIUM then make the PCB and manufacture 6 boards

    €730 (Avg Bid)
    €730 Offre moyenne
    58 offres
    Altium Expert 15 heures left

    Need to make schematic boards and Board layout, Only experts contact Dont waste my time I hired a freelancer he wasted my time and gave a messed board at last. Now, I have to do on my own

    €6 / hr (Avg Bid)
    €6 / hr Offre moyenne
    17 offres

    We have a PCB designed in Altium that requires a few simple modifications (just removing things and adding headers). The schematics is mostly updated and we need the layout to be updated. This should be a very quick job for someone experienced with Altium. Please apply only if you can do that job quickly.

    €24 (Avg Bid)
    €24 Offre moyenne
    21 offres

    The scope is to design a testbed utilizing the ESP32s3 chip (8MB RAM 32MB Flash version). Peripherals will be screen, 24 tik encoder, speaker/ buzzer, tactile switch. CAD is is attached along with component specs and data sheets. requirements for acceptance: design on Altium 19+ access to a FAB and components. Able to do their own debug and testing familiar with the ESP32 SOC family - EE design and firmware

    €2537 (Avg Bid)
    €2537 Offre moyenne
    32 offres designer, who specializes in marine electronics navigation systems technology such as AIS, Marine VHF and SSB Radio, Marine Radar, Chartplotter, Fishfinder, GPS Compass, multi-functional imaging technology. Tasks: • Hardware, software and development of marine electronics • R&D Development Tests (FAT) maintenance and improvement • Embedded systems Required Technologies and Tools • PCB design (Altium Designer) • Embedded RTOS (C++) • C# development in Visual Studio • VHF and GNSS, Radar systems Skills: • Hardware design and related programming • Enthusiasm and Commitment • English (Turkish) communication both written and spoken • Related to maritime electronics systems activities • Have hands-on skills. Backgr...

    €191 (Avg Bid)
    €191 Offre moyenne
    19 offres
    Altium Layout - Experts Only S'est terminé left

    I have a full schematics in Altium ready for layout. Nothing too complicated but I need someone experienced who knows basic layout rules (controlled-impedance traces, ground/power planes, noise, power, thermal, etc...) and can do the work very quickly. It's a very simple layout for someone with proper background. There are many follow-up jobs for the proper candidate. Please state your experience with Altium and possibly attach a picture of one of your layout.

    €37 (Avg Bid)
    €37 Offre moyenne
    20 offres

    We have an optics project that requires sources of Infrared and White light. As the light source, we require the f...only specific LEDs mentioned above. 3. Source other components (resistor/capacitor/mosfet/ic/etc) from Mouser India () ensuring that the component is in stock and can be dispatched As deliverable you will provide: 1. Circuit diagrams and schematics of the system. 2. CAD model (step file) of the assembled PCB so that it can be integrated with our mechanical designs. 3. Designer files (Altium/KiCAD/etc) 4. Gerber files, pick and place files, and formatted BOM which can be sent to a vendor for manufacturing -- We use PCBPower as a vendor. 5. Work with us to correct any issues that may crop up during manufacturing [i.e. problems with hole sizes, footprints, etc] ...

    €309 (Avg Bid)
    €309 Offre moyenne
    16 offres
    Altium_PCB_Python S'est terminé left

    Convert Altium PCB (Gerbers-DXF/DWG files) to Python language to make the automation.

    €22 / hr (Avg Bid)
    €22 / hr Offre moyenne
    25 offres
    Redesign PCB S'est terminé left

    Looking to find someone who can redesign a simple PCB board. The PCB is used to take inputs (manually or electronically) and trigger an event. There is CR2 battery that is used to trigger the event. We are also looking for monitoring of battery life us...(manually or electronically) and trigger an event. There is CR2 battery that is used to trigger the event. We are also looking for monitoring of battery life using a simple red/green LEDs. However, nothing is set in stone so we would be looking for your expertise and what is industry standard when redesigning this board. Must haves: Must be able to provide drawings and BOMS Experience with Altium or equivalent design software **Please share your experience or have something in your portfolio so we can review your capabi...

    €251 (Avg Bid)
    €251 Offre moyenne
    29 offres

    I am looking for a PCB designer who has rich experience in Altium PCB design and work as a individual freelancer. He might need to work long-term for several projects. The project is to simply update the current altium PCB design projects. All requirements are clear and will give you the current design files. The work should be done ASAP.

    €19 / hr (Avg Bid)
    €19 / hr Offre moyenne
    30 offres
    PCAD 2006 schematic to Altium S'est terminé left

    I've got a legacy PCAD 2006 scematics that are suddenly not compatible with Altium. Need a person to reasemble it for Altium with a few changes.

    €1040 (Avg Bid)
    €1040 Offre moyenne
    39 offres

    Need to work in US hours for at least 4 hrs a day. Need to be very flexible and well rounded. Lots of hours. Must be a great communicator and nice attention to details. Have an electronic degree of some sort. Very analytical and (again) detailed oriented. Include some references or pictures of your past work. Don't have to be fancy. Just something. Must have Altium and KiCad. Must speak English very well. Great if you know how to do automated testing. Will be supervised by engineers here in the US. Be available for 20 hrs a week.

    €18 / hr (Avg Bid)
    €18 / hr Offre moyenne
    17 offres
    patch antenna S'est terminé left

    I need to design a antenna patch for the 430 MHz band in accordance the technical info I give. You can use Kicad, Eagle or Altium pcb software for design,(preferably the first two). I need that you give the gerber files for make the antenna. I give all the technical data and a preliminary designed so if you have experience in RF and pcb design this will be a easy task.

    €64 (Avg Bid)
    €64 Offre moyenne
    24 offres
    Mid Range Radar TI awr2944 S'est terminé left

    To take the TI AWR2944 Reference design and convert to production design, removing parts of the design that are superfluous using the Altium files (schematics and pcb) supplied, and also modify software to filtering out all object data that does not meet specified speed range , distance range and angle range . TI Evaluation AWR2944 board will be supplied

    €24 - €49 / hr
    À la une Scellé
    €24 - €49 / hr
    5 offres
    PCB Fixes Altium S'est terminé left

    Described in the attached document

    €186 (Avg Bid)
    €186 Offre moyenne
    10 offres
    Build me PCB in Altium -- 2 S'est terminé left

    Hello I am looking for a PCB expert to work with SoC and RFFE. the project is divided in two MS 1)Tentative placement of componets 2)Final Routing and Placement of componets I want placement to be completed by Monday so I can finalize my ID Please explain your experience in bids

    €66 / hr (Avg Bid)
    €66 / hr Offre moyenne
    15 offres
    PCB Design S'est terminé left

    Single-layer PCB design needed. JPG schematic diagram of PCB will be provided by us. You have to make PCB design in Altium Software and provide us. PCB is not Complicated, very simple design

    €16 (Avg Bid)
    €16 Offre moyenne
    20 offres

    Hi, We have designed a PCB around the STM32F401 + SIM868E. This PCB has been designed in Altium and has some connection issues which needs to be resolved. So in short the PCB design needs to be validated and potentially reworked. Please contact for more information.

    €473 (Avg Bid)
    €473 Offre moyenne
    49 offres

    We have many simple modules to design like temperature sensor or LED drivers. For each module, you must select the key components and produce schematics and layout in Altium. You must also provide a basic Arduino firmware for basic interactions with the module. The jobs will be awarded on a per module basis but ideally the same person would end up making most of them. You must be experienced with Arduino and Altium.

    €24 (Avg Bid)
    €24 Offre moyenne
    19 offres
    PCB Design of Circuit - Altium S'est terminé left

    Design a PCB. Schematic is completed. Need to design PCB in Altium. the design will consist uC, LED driver and 7 segment display. Further details in chat.

    €29 (Avg Bid)
    €29 Offre moyenne
    34 offres
    Board redesign for order S'est terminé left

    I need to replace some connectors and resistors on the pcb board already designed. That work was done in altium. We are looking for a professional who can quickly complete it within an hour. I have to order to PCBA within 2 hours please help me

    €119 (Avg Bid)
    €119 Offre moyenne
    4 offres
    PCB Design In Altium -- 2 S'est terminé left

    Looking for experienced and New freelancers who know PCB Design in Altium India Only

    €32 (Avg Bid)
    €32 Offre moyenne
    13 offres

    Begin your proposal with "SMP". We are looking for an Embedded System Engineer who knows how to use Altium to develop electronic circuit designs (Preferably 2+ experience), can read Electronic Datasheets and can select materials. In PCB design, it is important to design up to 6 layers of boards. Must be proficient in C and C++ languages. Must be experienced in communication protocols such as I2C, UART, SPI, RS. NO EXPERIENCED CANDIDATES DO NOT APPLY.

    €147 - €441
    €147 - €441
    43 offres

    I am looking for an electrical engineer who can work on FPGA TEST Board design. The project is to design FPGA TEST Board for XC7VX690T-2FFG1157I chip. We need power supply connectors as Banana jack and JTAG, UART, and SPI flash, and other decoupling capacitors and resistors. We just need simple workable Sch and PCB design wit optimal design. The candidate should have rich experience electrical engineer who can work on FPGA TEST Board design. The project is to design FPGA TEST Board for XC7VX690T-2FFG1157I chip. We need power supply connectors as Banana jack and JTAG, UART, and SPI flash, and other decoupling capacitors and resistors. We just need simple workable Sch and PCB design wit optimal design. The candidate should have rich experience in FPGA PCB design using Alti...

    €29 / hr (Avg Bid)
    €29 / hr Offre moyenne
    14 offres
    Altium parts S'est terminé left

    Hello Thanh, I'm Mike in the US. Would you be interested in building some Altium parts?

    €20 / hr (Avg Bid)
    €20 / hr Offre moyenne
    1 offres
    Altium RF Front End PCB S'est terminé left

    The project has multiple boards. These boards are very simple, less than 10 components but requires attention to RF layout techniques. Microstrip and dense ground stitching are required. Connectors are edge mount SMA as well as surface mount MCX. We can provide a power point presentation on the various PCBs as well as Altium files, schematic and PCB placement along with data sheets of all the parts to be used.

    €2021 (Avg Bid)
    €2021 Offre moyenne
    31 offres
    Project for Muhammad B. S'est terminé left

    Hi Muhammad ! I have my own PCB already designed in Altium, also the source code done but need some improvement and Im having issues with the current engineer I hired. Would you like to join me in this project ? The device is already working and I received PCBs assembled from factory, everything works fine, just need to improve the firmware a little bit and maybe make new PCB design in the future (same ICs, same firmware, but different PCB shape). Thanks !!

    €24 / hr (Avg Bid)
    €24 / hr Offre moyenne
    1 offres
    Looking for expert PCB Designers S'est terminé left

    Hello, I am looking for expert PCB designers to work with me on for long term basis. I have multiple tasks and will share the details with selected freelancers only. You must be proficient in following software's: Proteus Altium KiCAD I highly encourage new freelances to apply for this job

    €129 (Avg Bid)
    €129 Offre moyenne
    45 offres

    У нас удаленно в команде работают конструктора (5 человек) часть в altium (схемы), часть в solidworks (конструкции), есть общий сервер, на нем хранилище pdm. Всё это работает крайне не стабильно, ищем кто готов вникнуть в глубины интеграции двух программ через ( и настроить систему для стабильной работы удаленной команды. Бюджет указан формально, стоимость услуг договорная.

    €10 (Avg Bid)
    €10 Offre moyenne
    5 offres

    I need to get the file attached inside this .tar achieve file into Altium. Unfortunately for me, Altium cannot import a file. It can only import an file. If you have OrCAD, either the demo or the full version, you should be able to open this file and SaveAs *.alg Then I should be able to import to Altium. Here is a link that explains why I can't import this .brd file to Altium.

    €27 (Avg Bid)
    €27 Offre moyenne
    4 offres

    Using Altium designer, Design a simple PCB to be able to connect an oscilloscope to a high voltage cables with protections see drawing. Voltage: Phase to phase RMS voltage is 750VAC at 50 to 70Hz or 1200VDC depending on the device where we will connect. Transient at in the 3kV range, with 1MHz frequency. This is what we want to record. So each trace will need to be spaced accordingly. Current: The wire we will use is a AWG18, however we can have fuse holder with fuse down to 2A for the track width. The probe I’m using have only micro-grabber tip, so ideally I would like to connect on some kind of test point, as shown below. So in the drawing in attachment, the plan was to install the PCB board inside a plastic box, have my cable that are connected on the top. I was thin...

    €314 (Avg Bid)
    €314 Offre moyenne
    23 offres

    We have a small 2in x 2in PCB design that requires a couple of minor modifications. The EE we were working with was located in the Ukr...mounting hole locations as they are although if more room is required to accommodate items 1 and 3 we can potentially make it longer although the standoff locations must remain unchanged. This can de discussed in detail if resizing is required. We can provide the Gerber files and supporting documentation although we do not have the original design files. We believe the original design was done in Altium. The EE we are looking for must be able to communicate and be fluent in written English, the EE will also need to be open to providing ideas and suggestions and work with us quickly to complete this project quickly. Please feel free to ask any ...

    €162 (Avg Bid)
    €162 Offre moyenne
    30 offres

    Due to the microprocessor shortage, I can no longer source the processer for my PCBA. This means I can't manufacture my product. I need somebody to redesign the PCBA to support the new processor, and edit the firmware to accommodate the new processor. I will supply the Altium native PCB design and Arduino code. Deliverables will be the revised Altium PCB design, revised Arduino code, and a working prototype PCBA that was manufactured in a production environment. The original processor is an ATMEGA328P-AU. The new one (I was able to purchase a lot of them) is ATMEGA4089-MUR. It is expected that you will posses the knowledge to ensure that the design is robust electronically by reviewing power and thermal design. Most likely if the new processor wattage is equal or...

    €493 (Avg Bid)
    €493 Offre moyenne
    28 offres
    RFID Card Reader S'est terminé left

    I have been looking for a freelancer who can develop RFID card reader with following requirement. requirement: - detectable distance: 3cm - input voltage: 3.3V - communication: UART - board size: 59.5*59mm - interface: PH2.0 4P(1-VCC, 2-TX, 3-RX, 4-GND) You are free to choose the RFID chip, but should ensure the requirement of detectable d...have been looking for a freelancer who can develop RFID card reader with following requirement. requirement: - detectable distance: 3cm - input voltage: 3.3V - communication: UART - board size: 59.5*59mm - interface: PH2.0 4P(1-VCC, 2-TX, 3-RX, 4-GND) You are free to choose the RFID chip, but should ensure the requirement of detectable distance and stock. You should provide pcb design file(Altium Designer) and firmware at the end o...

    €392 (Avg Bid)
    €392 Offre moyenne
    7 offres

    design the system using orCAD lite 1. Describe the design process of your system. 2. Screenshots of the overall svstem and sub-systems (if any) in aiding your explanation. 3. Present simulation results to verify that your system works.

    €10 - €30
    €10 - €30
    0 offres
    PCB Routing Work S'est terminé left

    I would like to re-route a Main board. I have schematics ready. The PCB is made in Altium. The Job consist of moving connectors around, reroute traces. Our Organization shall keep the rights to the work. Let me know if you are willing to take on this task.

    €54 (Avg Bid)
    €54 Offre moyenne
    28 offres
    Embedded Hardware Engineer S'est terminé left

    We are looking for an Embedded Hardware Engineer to design electronic circuits for our needs. You must meet the following qualifications - Designed a 4-6 layer Circuit Board - Knowledge of communication protocols such as UART, SPI, I2C, rs-232, rs-485 - Experienced in IoT field - Able to design circuits with Altium - Used GSM module on the circuit - Able to select components and read datasheets of components If you have the above qualifications, we are looking for an Embedded System Engineer with whom we can work for a long time. Please write "6161" at the beginning of your application. Applications that are not written will definitely NOT be taken into account!

    €245 - €734
    €245 - €734
    41 offres

    PCB design for a Project, Schematic is done and i have file ready , i want someone who can finish the design in three days and deliver to me , its a simple project and i also have the guidlines files ready, which has to be taken care, u can use easyeda or altium. please reply if intersted and can do in 3 days of time, thank you

    €132 (Avg Bid)
    €132 Offre moyenne
    9 offres
    Arduino Altium PCB Fixes S'est terminé left

    I have a completely routed PCB schematic and layout design as an Altium project. The PCB is 4-layer with both SMD and Through-hole components. It needs some changes as described in the attached file.

    €85 (Avg Bid)
    €85 Offre moyenne
    11 offres
    Altium PCB design S'est terminé left

    We need a simple PCB designed in Altium form the attacehd files. Manufacturing files and a 3D model is required.

    €296 (Avg Bid)
    €296 Offre moyenne
    51 offres
    Review PCB design in Altium S'est terminé left

    We have a small PCB design that we’d like reviewed by someone. The files are created in Altium. Essentially the PCB has two LEDs and two photodiodes with amplifiers, a PIC microcontroller, some status indicators. We need a review done to determine if it would meet our requirements and if not we will require you to modify the design.

    €258 (Avg Bid)
    €258 Offre moyenne
    67 offres
    Need a PCB Designer S'est terminé left

    Hi, I am looking for a PCB designer who must have designed Arduino related PCB boards, must have worked on Altium or Eagle. Thanks.

    €142 (Avg Bid)
    €142 Offre moyenne
    50 offres

    Hello All, I'm looking to build a team of electronics Engineers for long-term gigs, one project after the other. The main tasks will be circuit design, Simulation, Design Calculations, Schematic and PCB layout ( Kicad, Diptrace, Altium ...), SW( Arduino/Atmega, STM32, ESP32 ...) Please bid only if you are willing to do the jobs within the agreed requirement, budget, and time. Thank you

    €308 (Avg Bid)
    €308 Offre moyenne
    55 offres
    3kVA Inverter S'est terminé left

    ...and MPPT simulation results will be shown. Matlab simulation files will be delivered. Fees for this milestone: 150 dollars. 7 days. 2. Altium schematics: I will give you the schematics of the inverter. They will consist of the power stage, the control stage, and the communication stage. I will also attach a list of materials so you can evaluate the costs of the inverter. My fees for this stage are 200 dollars. 8 days. 3. PCBs: Once you confirm and approve the schematic, I will proceed to the design of the PCB board to make the converter as compact as possible as a commercial one. I will give you all the necessary files so that you can compile them in Altium. My fees for this stage are 350 dollars. 10 days. 4. Program Files & Source files, instructions, and technical...

    €957 (Avg Bid)
    €957 Offre moyenne
    1 offres

    1. Conversion of existing PCB artwork files created in PADS LAYOUT 9.2 - 2010 to CADENCE / ORCAD 2022 - 17.4 - 2019. 2. Conversion of Schematics created in PADS to CADENCE / ORCAD / CAPTURE CIS 17.4. 3. Project creation in CADENCE / ORCAD / CIS et al. 4. Swapping of layers and layer ordering once converted. Example: our PADS files are ordered from bottom to top (Layer 1 through Layer X, Layer 1 on the bottom). The layers will be required to shift so that Layer 1 is on the TOP layer. 5. Checking and, if necessary, update / correct incorrect symbol / pad designs to current design based on the parts in our BOM's. 6. Preliminary layout / design checks by DIT-MCO prior to release. 7. Correcting / converting Pad Stacks to be in accordance with DIT-MCO Specifications. 8....

    €21 / hr (Avg Bid)
    €21 / hr Offre moyenne
    8 offres
    Help me complete altium PCB S'est terminé left

    Hi, I have schematic 95% complete, i will need someone to assist me over weekend to complete my altium PCB. Its related to 3kw inverter

    €144 (Avg Bid)
    €144 Offre moyenne
    38 offres