Wireless Certification (CSA, FCC, IEC, FAA, IEEE, CE, Atex) Electronics Engineers à embaucher

  • Wireless Certification (CSA, FCC, IEC, FAA, IEEE, CE, Atex)
  • Electronique
Suggestions :
plus

Pays

Localisation spécifique

Examens

Taux horaire (USD)

Évaluation

En ligne

Montrer 120 résultats
  • Embaucher     Alejandro10inv
Embaucher     Alejandro10inv

    Alejandro10inv Alejandro10inv

    Colombia $35 USD / heure
    Machine Design Engineer
    Colombia
    7.1
    5 commentaires 5 commentaires $35 $ US par heure
    Expert in machine design and industrial design, 10 years of experience, from designer to director of engineering departments (I + D) Investigation and development.
    Expert in machine design and industrial design, 10 years of experience, from designer to director of engineering departments (I + D) Investigation and development. moins
  • Embaucher Alejandro10inv
  • Embaucher     naveedmazhardz
Embaucher     naveedmazhardz

    naveedmazhardz naveedmazhardz

    Pakistan $15 USD / heure
    PhD Electrical Engineering (Control Systems)
    Pakistan
    I am doing PhD Electrical Engineering with specialization in Control Systems. I can assist larger projects relevant to Electronics, Control, Circuits, Digital Design, Digital Signal Processing, Engineering Mathematics, Arduino, PIC, C++, Verilog, VHDL, MATLAB and Simulink. I am working as freelancer on different...
    I am doing PhD Electrical Engineering with specialization in Control Systems. I can assist larger projects relevant to Electronics, Control, Circuits, Digital Design, Digital Signal Processing, Engineering Mathematics, Arduino, PIC, C++, Verilog, VHDL, MATLAB and Simulink. I am working as freelancer on different forums since 6 years. Also, I offer 1-week video-tutorship for following engineering courses: *Calculus *Control Systems *DSP *Circuit Analysis *Physics *Electronics *C++/OOP *Digital Logic Design moins
  • Embaucher naveedmazhardz
  • Embaucher     binyameen441
Embaucher     binyameen441

    binyameen441 binyameen441

    Pakistan $12 USD / heure
    Electrical Engineer, Professional Writer......
    Pakistan
    I am an Electrical Engineer. I am expert in 1) Arduino/ Microcontroller 2) Matlab/Simulink 3) Wireless Technologies (BLE, WiFi, RF, GSM, GPS, ESP32/ESP8266, nRF51, nRF52) 4) Mobile App Development( IOS, Android) 5) Pspice/proteus/multism/pscad 6) Embedded & IOT Devices 7) ...
    I am an Electrical Engineer. I am expert in 1) Arduino/ Microcontroller 2) Matlab/Simulink 3) Wireless Technologies (BLE, WiFi, RF, GSM, GPS, ESP32/ESP8266, nRF51, nRF52) 4) Mobile App Development( IOS, Android) 5) Pspice/proteus/multism/pscad 6) Embedded & IOT Devices 7) Electronics/ PCB design( Altium, Eagle, Proteus) 8) C++/C/Java/Python/php 8) Hfss/ PLC/ ltspice/Labview 10) Autocad/ Solid works/3D design/CAD 11) Robotics 12) Mathematics/Digital electronics/Circuit design 13) Verilog/VHDL/FPGA I am also a talented and experienced writer. Writing is more than a passion to me. I am providing the best quality services at a reasonable budget. I am expert in 1) Report writing 2) research writing 3) Articles writing 4) Technical writing 5) content writing 6) academic writing 7) Literature review 8) Blogs 9) Resume Writing & Cover Letter 10) Product Descriptions , Data Entry and Excel work 11) Ghost writing I can also do Wireless , Networking ,Cisco, Chemical Engineering, Material Engineering,Civil Engineering Research and Report writing 100% guaranteed plagiarism free work. So please reach out to me so that we can discuss your project in greater detail! moins
  • Embaucher binyameen441
  • Embaucher     DeepNetMatlab
Embaucher     DeepNetMatlab

    DeepNetMatlab DeepNetMatlab

    Turkey $20 USD / heure
    MSc Electrical Engineer
    Turkey
    3.2
    1 commentaire 1 commentaire $20 $ US par heure
    I'm an electircal engineer and PhD student. I am specialized in but not limited to: - Digital signal processing - Biomedical signal (EEG, ECG, etc) processing - Pre-processing signals for machine learning algorithm - Features extraction for machine learning algorithm - Classification with k...
    I'm an electircal engineer and PhD student. I am specialized in but not limited to: - Digital signal processing - Biomedical signal (EEG, ECG, etc) processing - Pre-processing signals for machine learning algorithm - Features extraction for machine learning algorithm - Classification with k nearest neighbor (kNN) - Classification, regression, modeling and prediction with Artificial neural network (ANN) - Classification, regression, modeling and prediction with Support vector machines (SVM) - Image/signal transformation and representation for deep learn. ing algorithms - Image to label classification with CNN - Image to image regression with CNN - Object detection with R-CNN, fast R-CNN, faster R-CNN and YOLO - Image denoising with DnCNN - Image generation with GAN and VAE and etc. - Time series prediction with LSTM - Sequence to label classification with LSTM - Sequence to sequence classification with LSTM moins
  • Embaucher DeepNetMatlab
  • Embaucher     mos3d
Embaucher     mos3d

    mos3d mos3d

    Egypt $25 USD / heure
    R&D Electronics Engineer ( Master Degree ✅ )
    Egypt
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work moins
  • Embaucher mos3d
  • Embaucher     mozumder007
Embaucher     mozumder007

    mozumder007 mozumder007

    Bangladesh $10 USD / heure
    R&D Electronics Engineer
    Bangladesh
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done...
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done many projects. and they are #iot based load control #iot based dimming fan light #iot based sending data to website #gsm based security project #fingerprint attendance system #advanced pid line following robot #sun tracking solar system #home automation #iot agricultural monitoring system #obstacle avoiding robot # small range radar system using sonar sensor . # Ir remote-based load control circuit. # design and implementation of custom made arduino and stm32 boards . # Bluetooth controlled car . # wireless data transmission using nrf module # Home security device using esp and gsm module. # Mini drone with Esp 32 . # STM32 featured line following robot and many more robotics projects. I have experience about: 1.Circuit Design 2.PCB Design & Layout making using the following softwares : ✅ Altium ✅ Autodesk Eagle ✅ Proteus ✅ Orcad ✅ KiCad etc My goal is to provide : ✅ Best effort and quality for every project at reasonable rate ($) . ✅ Free servicing facility even after completing the project. ✅ The project perfectly within shortest possible time. Even i will try my best to complete my project before the expiration time.Please allow me to complete your project and i am ensuring my best effort for this.I would love to hear more about what would make this project successful for you and explore if we would be good fit to work together.I am looking forward to your response and wish you all the best for you future. So you can completely rely on me. moins
  • Embaucher mozumder007
  • Embaucher     Mahihassi
Embaucher     Mahihassi

    Mahihassi Mahihassi

    Pakistan $5 USD / heure
    Electrical Engineer
    Pakistan
    I am an electrical engineer. I have done a lot of work in the fields of digital system design, verilog, micro controllers, arduino, matlab, programming etc.
    I am an electrical engineer. I have done a lot of work in the fields of digital system design, verilog, micro controllers, arduino, matlab, programming etc. moins
  • Embaucher Mahihassi
  • Embaucher     oscar10gool
Embaucher     oscar10gool

    oscar10gool oscar10gool

    Mexico $35 USD / heure
    Expert in Electrical and Electronics engineering
    Mexico
    5.2
    4 commentaires 4 commentaires $35 $ US par heure
    Full time consultant/freelancer, working to provide turnkey IoT solutions. Experience designing consumer electronics (and more) from concept phase to production. Working skills include: - Circuit design - PCB design and layout - Firmware development - Micro controller implementation - FPGAs - Rapid prototyping - MFI,...
    Full time consultant/freelancer, working to provide turnkey IoT solutions. Experience designing consumer electronics (and more) from concept phase to production. Working skills include: - Circuit design - PCB design and layout - Firmware development - Micro controller implementation - FPGAs - Rapid prototyping - MFI, FCC, UL certification process Flexible work schedule and good communication skills. Can work autonomously or as part of an existing team. I'll work to convert your ideas into a functional prototype for proof of concept, and then provide the tools and knowledge to translate that into a production-ready product. moins
  • Embaucher oscar10gool
  • Embaucher     onpost
Embaucher     onpost

    onpost onpost

    Russian Federation $19 USD / heure
    Embedded software developer, Firmware developer
    Russian Federation
    I have been working in embedded programming for more than 12 years. Throughout my career I have developed firmware for UAVs, UGVs and other autonomous systems with multiple MCUs or DSPs. Implemented image processing for an optical navigating system. Digital signal processing. Math simulation of the systems under...
    I have been working in embedded programming for more than 12 years. Throughout my career I have developed firmware for UAVs, UGVs and other autonomous systems with multiple MCUs or DSPs. Implemented image processing for an optical navigating system. Digital signal processing. Math simulation of the systems under development in Matlab and Mathcad. I am experienced in firmware development for different MCUs and CPUs (including DSPs): Texas Instruments, STMicroelectronics (STM32, STM8), Microchip/Atmel (PIC, ATSAM, ATMega, including Arduino), SiLabs, Cypress, Analog Devices, NXP, Freescale, Renesas. Used IDEs are: IAR Embedded Workbench, Keil, STM32CubeIDE, Eclipse, AVR/Atmel Studio, Arduino IDE, MPLAB, Code Composer Studio, Simplicity Studio, Segger Embedded Studio, Atollic TrueStudio, PSoC Designer, CrossWorks, Raisonance Ride7. Programming languages: C, C++, Assembler (AVR, 8051, PIC, PowerPC), Matlab. moins
  • Embaucher onpost
  • Embaucher     A5Alberto
Embaucher     A5Alberto

    A5Alberto A5Alberto

    Mexico $22 USD / heure
    DOMO Integral Solutions
    Mexico
    5.1
    2 commentaires 2 commentaires $22 $ US par heure
    I have been working in Continental Automotive Guadalajara and now in Queretaro, first as an intern, then as an Engineer Jr., then as Full Engineer, and then as Coordinator. I had the opportunity to develop myself and implement my knowledge in the technical part, but also in the management area. Nowadays I have my...
    I have been working in Continental Automotive Guadalajara and now in Queretaro, first as an intern, then as an Engineer Jr., then as Full Engineer, and then as Coordinator. I had the opportunity to develop myself and implement my knowledge in the technical part, but also in the management area. Nowadays I have my own company called DOMO Integral Solutions, which the main purpose consists of to integrate solutions created by a multidisciplinary team to completely fill the client's needs. Our activities include development, testing, manufacture, and prototyping. We combine almost 20 years of experience in different areas from industry, such as automotive development, PCB manufacture, drone design, telecommunications, business management, etc. Nowadays my job consists of combine both sides (technical and management), be responsible for people and achieve goals for projects, always maintaining high standards of quality. moins
  • Embaucher A5Alberto

Bonjour , voici certains freelances offline

Bonjour , voici certains freelances offline correspondant à ""