Manufacturing Engineers à embaucher

  • Manufacturing Engineering
  • Online Users
Suggestions :
plus

Pays

Localisation spécifique

Examens

Taux horaire (USD)

Évaluation

En ligne

Montrer 20 résultats
  • Embaucher     hromenkoad
Embaucher     hromenkoad

    hromenkoad hromenkoad

    Bulgaria $22 USD / heure
    Designer and organizer of mechanical production
    Bulgaria
    0.0
    0 commentaires 0 commentaires $22 $ US par heure
    • Worked with the principal stakeholders on the end-to-end life cycle industrialand mechanical engineering projects from inception to completion that led to the successful completion of assigned projects. • Aligned support and resources for continuous process improvement and facilitated the design of complex...
    • Worked with the principal stakeholders on the end-to-end life cycle industrialand mechanical engineering projects from inception to completion that led to the successful completion of assigned projects. • Aligned support and resources for continuous process improvement and facilitated the design of complex mechanical systems using 3D modeling programs including Autodesk Mechanical Desktop, Autodesk Inventor, and other parametric design programs of a similar level of complexity. • Served as a consultant for the successful execution of a project for the International Asset Bank AD, Sofia, Bulgaria, which included the analysis and development strategies for the successful commission of a plant for the production of water-based polymers that will save up to 2 mln Euro for the company on the stage of production start-up. • Provided support and scientific research associated with non-metalsprocessing.Tutoring to over 1200 students at the Department of Metal-Cutting Machine Tools at Donetsk Polytechnic Institute. • Managed several successful projects and implemented scientific research strategies including the development of numerous patents for inventions and preparation of patents license for sale to Wendt, Germany at Donetsk Polytechnic Institute. • Consistently demonstrated high level of knowledge and skills of the technological aspects of mechanical processing of stone, glass, , ceramics and other particularly hard non-metallic materials. • Facilitated the successful creation and lunch of civil, structural, and mechanical Engineering concepts and products to small industries with up to 50 employees. My weak point is the lack of a high level of English, so I prefer to communicate in writing. My second drawback is that I am a beginner freelancer, but this should be compensated by my wide and versatile experience and my desire to do everything efficiently. moins
  • Embaucher hromenkoad
  • Embaucher     dileep16
Embaucher     dileep16

    dileep16 dileep16

    India $15 USD / heure
    Mechanical Engineer, Architect, Product Designer
    India
    0.0
    0 commentaires 0 commentaires $15 $ US par heure
    ⭐Thanks for visiting our profile! We are highly skilled Machine Design & Architectural design professional who specialize in 3D modelling and rendering . Our goal is to provide perfect results to clients and we will never stop working until we deliver 100% results! We have a variety of tools at our disposal,...
    ⭐Thanks for visiting our profile! We are highly skilled Machine Design & Architectural design professional who specialize in 3D modelling and rendering . Our goal is to provide perfect results to clients and we will never stop working until we deliver 100% results! We have a variety of tools at our disposal, including Solidworks, Inventor, AutoCAD, Revit, Sketchup, 3DMax,and many others. Here are some of my good experiences: ⭐ Mechanical/Industrial/product design. ⭐ Sheet metal for Enclosure design.ss ⭐ STEP/X_T/IGES... files for manufacturing. ⭐ STL files for 3D printing. ⭐ Converting from Scan data to STEP file. ⭐ Technical/manufacturing/Patent drawing. ⭐ DXF file for Laser/Water jet/CNC cutting. ⭐ Converting from PDF/image/hand sketch to DWG/DXF file. ⭐ Architectural 3D modeling, 3D rendering and Walk-through animation. ⭐ Converting from Point cloud to Revit model. ⭐ Concept/permit/technical drawing for Architectural design. moins
  • Embaucher dileep16
  • Embaucher     Iftikhar2524
Embaucher     Iftikhar2524

    Iftikhar2524 Iftikhar2524

    Pakistan $12 USD / heure
    CAD Designer | Draftsman
    Pakistan
    0.0
    0 commentaires 0 commentaires $12 $ US par heure
    Hi, My name is IFTIKHAR UL HASSAN. I have 5+ year's experience in CAD Designing. I have experience in AutoCAD, FUSION 360, Inventor, and CATIA v5. I have essential knowledge of 3D printable design, Reverse Engineering, and Mesh cleaning for 3D printable files. "My working hours are Monday to Friday from 5:00 pm to...
    Hi, My name is IFTIKHAR UL HASSAN. I have 5+ year's experience in CAD Designing. I have experience in AutoCAD, FUSION 360, Inventor, and CATIA v5. I have essential knowledge of 3D printable design, Reverse Engineering, and Mesh cleaning for 3D printable files. "My working hours are Monday to Friday from 5:00 pm to 12:00 am (PKT)" "Full time Available on Saturday and Sunday" I Provide the following services. ⭐Technical Shop drawings and Product design. ⭐Reverse Engineering. ⭐Mechanical Designs 2D engineering drawing + 3D Model ⭐ Steel Structure Drawings, Sheet Metal Fabrication Drawings with shop technical drawings, Generate B.O.Q, Technical Documentation ⭐ Industrial Equipment/Machinery Assembly drawings + Part drawings and Generate 3D Animation { Parts to Assembly} ⭐Generate or Modify STL file for 3D Printer. ⭐ Consumer 3D Products 3D Model + Rendering+ Animation ⭐Process Piping, Piping Layouts, Piping Isometric, P & ID & PFD . ⭐ Redraw the image or PDF file into AutoCAD. Civil or Architecture plans, Hand drawings can be converted into CAD. Please feel free to message me for further discussion. moins
  • Embaucher Iftikhar2524
  • Embaucher     engabdo172
Embaucher     engabdo172

    engabdo172 engabdo172

    Egypt $10 USD / heure
    automation engineer
    Egypt
    0.0
    0 commentaires 0 commentaires $10 $ US par heure
    I work as an automation engineer i have 10 years of experience in this field, I have implemented many projects in the field of plc and motion Control, especially the field of motion control, and I have updated many SCADA systems in several marine units, and I also have great experience in the field of industrial...
    I work as an automation engineer i have 10 years of experience in this field, I have implemented many projects in the field of plc and motion Control, especially the field of motion control, and I have updated many SCADA systems in several marine units, and I also have great experience in the field of industrial communications I deal with a lot of types of plc siemens -Alen Bradly-Omron-delta i can also develop many applications using VisualBasic as hmi screen for hmi I program many types -Siemens WinCC -factory talk wentiek for scad system, I work with cimplicty -WinCC and DIA View moins
  • Embaucher engabdo172
  • Embaucher     AnsarDraftsman
Embaucher     AnsarDraftsman

    AnsarDraftsman AnsarDraftsman

    India $12 USD / heure
    Autocad Draftsman
    India
    0.0
    0 commentaires 0 commentaires $12 $ US par heure
    With having more than 14 years of experience as draftsman with technical proficiency, creative thinking, attention to the drawing details, time management and good communication skills, I am looking forward for a challenging career where I can constantly expand my knowledge and refine my skills so that I can be a...
    With having more than 14 years of experience as draftsman with technical proficiency, creative thinking, attention to the drawing details, time management and good communication skills, I am looking forward for a challenging career where I can constantly expand my knowledge and refine my skills so that I can be a dynamic asset of the organization. DUTIES AND RESPONSIBILITIES  Preparing all Sorts of Work Shop Drawings by using Auto Cad & Revit.  Preparing Structural General Arrangement drawings by using x-ref, attributes, coordinate methods and coordination with all the discrepancies.  Preparing all types of steel reinforcement drawings by using Auto Cad Software.  Preparing bar bending schedules.  Preparing steel fabrication drawings as per all standards.  Coordination with Project Manager, Construction Manager, Technical Manager, Structural Engineer, Architect, Quantity Surveyors, Procurement Manager and MEP for Technical issues.  Coordination with Sub-Contractors for their engineering works including but not limited to the following, Checking their drawings. Reply to their RFI’s.  Follow up with the Technical & Production team.  Preparing As-Built drawing  Quality Control, follow up for all the engineering works.  Quantity Takeoff for positive or negative variations of Sub-Contractors.  Leading the Draftsman’s Team, helping them for their drawings issues,  Sending RFI’s (Request for information) to consultant for clarification. moins
  • Embaucher AnsarDraftsman
  • Embaucher     JulesWilcox
Embaucher     JulesWilcox

    JulesWilcox JulesWilcox

    United Kingdom $65 USD / heure
    Experienced Aerospace Engineer esp. Simulation
    United Kingdom
    0.0
    0 commentaires 0 commentaires $65 $ US par heure
    I have worked as a stress engineer in the aeronautical, space and automotive industries for over 25 years with a focus on structural integrity, crashworthiness and occupant safety (aircraft and automotive). My experience includes work as a Compliance Verification Engineer for Stress (CVE) per EASA regulations as well...
    I have worked as a stress engineer in the aeronautical, space and automotive industries for over 25 years with a focus on structural integrity, crashworthiness and occupant safety (aircraft and automotive). My experience includes work as a Compliance Verification Engineer for Stress (CVE) per EASA regulations as well as demonstrating compliance against FAA airworthiness requirements. To underpin aspects of my experience I have also completed FAA courses in Fatigue and Damage Tolerance Analysis (Safarian) and Dynamic Impact Test Procedures (FAA CAMI). Regarding structural analysis, I am very experienced in Nastran and LS-DYNA but have used other multi-physics and specialist analysis packages (e.g. PAM-CRASH, NASGRO, SIGFIT). Pre/post experience is predominantly in Patran, Hypermesh, Oasys (PRIMER, T/HIS, D3PLOT) and FEMAP. Hourly rate and quotes generally include the license fee for software products as required. I also support all manner of industry and fields that benefit from physics simulation, visualization, 3D animation and rendering. I have a good number of associated software/IT skills and am used to linking these up to facilitate custom workflows. E.g. programming in Fortran or C++ for data conversion between software environments not designed to talk to each other. I am generally versatile and good at integrating existing experience into new areas. moins
  • Embaucher JulesWilcox
  • Embaucher     MohamedBz
Embaucher     MohamedBz

    MohamedBz MohamedBz

    Algeria $25 USD / heure
    Designer/Modeler
    Algeria
    0.0
    0 commentaires 0 commentaires $25 $ US par heure
    Greetings Freelancer Community. My name is Mohamed, i am a Mechanical Engineering Bachelor. My current skills and experience are: plastic parts design and modelling using Solid-Works software (plastic molding injection process). I would be pleased to be at your service!
    Greetings Freelancer Community. My name is Mohamed, i am a Mechanical Engineering Bachelor. My current skills and experience are: plastic parts design and modelling using Solid-Works software (plastic molding injection process). I would be pleased to be at your service! moins
  • Embaucher MohamedBz
  • Embaucher     rainbow
Embaucher     rainbow

    rainbow rainbow

    India $20 USD / heure
    shashikhan
    India
    0.0
    0 commentaires 0 commentaires $20 $ US par heure
    Doing software development for last 20 year. The work in java , oracle ,mysql, C++ languages is undertaken. Web site designing and web page development
    Doing software development for last 20 year. The work in java , oracle ,mysql, C++ languages is undertaken. Web site designing and web page development moins
  • Embaucher rainbow
  • Embaucher     BuddhikaRapiD3D
Embaucher     BuddhikaRapiD3D

    BuddhikaRapiD3D BuddhikaRapiD3D

    Sri Lanka $25 USD / heure
    Mechanical Engineer | Product Design | CNC/CAM
    Sri Lanka
    0.0
    0 commentaires 0 commentaires $25 $ US par heure
    I'm B.Sc. Mechanical Engineer with more than 10 years extensive experience in fields of Mechanical/Design Engineering, Product Concept Design, Reverse Engineering Design for 3D scan data. I'm also specialized in CNC/CAM programming for milling & turning. I do FEA analysis & simulation, where it's needed with Ansys. I...
    I'm B.Sc. Mechanical Engineer with more than 10 years extensive experience in fields of Mechanical/Design Engineering, Product Concept Design, Reverse Engineering Design for 3D scan data. I'm also specialized in CNC/CAM programming for milling & turning. I do FEA analysis & simulation, where it's needed with Ansys. I learn fast how the new things do/work if I don't know it well right now...! My Portfolio/Personal Website https://RapiD3Dme(.)com https://RapiD3D(.)lk I'm Highly Capable Of Offering The Following Related Services # Mechanical Engineering Design / Design Calculation # Product/Concept Design # Reverse Engineering Design for 3D Scan Data (Point Clouds, STL ,Mesh,..) (Geomagic Design X, Geomagic Wrap, ...) # Plastic Part/Article design for Injection/Blow Molding # 3D Printing / Rapid Prototyping & Concept Prototype Manufacturing # Variety of Bra Cup Mold Design ( PU Cup, Push Up, Wired Cup & One-Piece Bra) # CNC / CAM Programming 3- 5 Axis ( NX CAM, PTC CREO CAM & SolidCAM) # Rendering & Animation along with Keyshot/ Blender # FEA Analysis with Ansys Feel free to contact me any time to discuss your project. moins
  • Embaucher BuddhikaRapiD3D
  • Embaucher     Mfathy266
Embaucher     Mfathy266

    Mfathy266 Mfathy266

    Egypt $10 USD / heure
    Graphic Designer
    Egypt
    0.0
    0 commentaires 0 commentaires $10 $ US par heure
    Hello there! I am senior Electrical engineer with Ten years experience as a major filed and I am interested in working as a free lancer for auto-cad , Revit like Arch, MEP (Mechanical ,electrical and plumbing )Shop drawing and as built also building graphic design field and Rendering . *Also Photoshop and...
    Hello there! I am senior Electrical engineer with Ten years experience as a major filed and I am interested in working as a free lancer for auto-cad , Revit like Arch, MEP (Mechanical ,electrical and plumbing )Shop drawing and as built also building graphic design field and Rendering . *Also Photoshop and illustrator including ( photos editing , logo design ). we offer after delivery service to follow up the client and fix any errors . we are seeking for a challenging environment and to be adding value for this global community . moins
  • Embaucher Mfathy266

Bonjour , voici certains freelances hors ligne

Bonjour , voici certains freelances hors ligne correspondant à ""