Antenna Design Digital Electronics Embedded Engineers à embaucher

  • Antenna Design
  • Digital Electronics
  • Embedded Systems
Suggestions :
plus

Pays

Localisation spécifique

Examens

Taux horaire (USD)

Évaluation

En ligne

Montrer 32 résultats
  • Embaucher     anandkumarcb2014
Embaucher     anandkumarcb2014

    anandkumarcb2014 anandkumarcb2014

    India $10 USD / heure
    Embedded System Expert
    India
    1.6
    1 commentaire 1 commentaire $10 $ US par heure
    Desiging and developing wide range of Embedded system based on ARM processors, AMD and Intel. Worked on multiple RTOS and Linux operating system. Device driver developer .
    Desiging and developing wide range of Embedded system based on ARM processors, AMD and Intel. Worked on multiple RTOS and Linux operating system. Device driver developer . moins
  • Embaucher anandkumarcb2014
  • Embaucher     EinsteinWorks
Embaucher     EinsteinWorks

    EinsteinWorks EinsteinWorks

    India $35 USD / heure
    Pursuing Phd in Power Electronics
    India
    3.0
    2 commentaires 2 commentaires $35 $ US par heure
    Pursuing PhD in Power Electronics with several years of industrial experience in power electronics and power system R&D. Experience in GATE coaching for more than three years. Expert in: MATLAB/Simulink, PSCAD, Logisim, PowerWorld. Micro-Cap , LTspice, Multisim, PSIM, KiCad, SIMetrix/SIMPLIS. FEMM
    Pursuing PhD in Power Electronics with several years of industrial experience in power electronics and power system R&D. Experience in GATE coaching for more than three years. Expert in: MATLAB/Simulink, PSCAD, Logisim, PowerWorld. Micro-Cap , LTspice, Multisim, PSIM, KiCad, SIMetrix/SIMPLIS. FEMM moins
  • Embaucher EinsteinWorks
  • Embaucher     metusa
Embaucher     metusa

    metusa metusa

    Turkey $15 USD / heure
    embedded software engineer & hardware designer
    Turkey
    2.9
    1 commentaire 1 commentaire $15 $ US par heure
    • Embedded systems software with C/C++ and Assembly • Embedded Linux Programming • Worked on STM32 (ARM Cortex M3/M4), Texas Instruments DSP’s (C5505) and Tiva boards, MSP430, PIC32 MCUs • Developed projects on Beaglebone, Arduino, Raspberry Pi • Worked with TI audio codecs, LoRa modules, NAND flash memory, GSM,...
    • Embedded systems software with C/C++ and Assembly • Embedded Linux Programming • Worked on STM32 (ARM Cortex M3/M4), Texas Instruments DSP’s (C5505) and Tiva boards, MSP430, PIC32 MCUs • Developed projects on Beaglebone, Arduino, Raspberry Pi • Worked with TI audio codecs, LoRa modules, NAND flash memory, GSM, GPS • Worked on target tracking using PX4 autopilot on UAVs • Have experience with RTOS like FreeRTOS, uCOS-III, NuttX • Have experience with middlewares such as I. FatFs file system II. LwIP TCP/IP stack III. ARM mbedTLS and OpenSSL IV. USB Device, Host and OTG peripherals • Worked with development tools such as System Workbench for STM32, TI Code Composer Studio, IAR, Keil, MPLAB X IDE, Arduino IDE, Eclipse CDT, Microsoft Visual Studio • Have experience with peripherals like UART, SPI, I2S, I2C, DMA , OneWire, USB, CAN, Ethernet • Have experience in EMV(credit/debit cards) specifications and ISO 7816 standards • Public Key Cryptography, X.509 and CVC certificate operations moins
  • Embaucher metusa
  • Embaucher     noumanmehtab86
Embaucher     noumanmehtab86

    noumanmehtab86 noumanmehtab86

    Pakistan $25 USD / heure
    Product Development Company
    Pakistan
    2.1
    1 commentaire 1 commentaire $25 $ US par heure
    Looking for Solution to your IT or Electronics based Problems?? If Yes than You are on the right Place. I'm Electronics Engineer having Experience of 12+ years of Working in the field. I'm running my own company now named as "Falcon Systems". I have teams of highly skilled and professional people having experience in...
    Looking for Solution to your IT or Electronics based Problems?? If Yes than You are on the right Place. I'm Electronics Engineer having Experience of 12+ years of Working in the field. I'm running my own company now named as "Falcon Systems". I have teams of highly skilled and professional people having experience in the field of Electronics,IT,Telecommunication, Design,Embedded System, Signal and Systems,Internet of Things (IOT) ,App Dev, Web Dev and Image Processing. We are here to solve your problems and bring your thoughts to reality. moins
  • Embaucher noumanmehtab86
  • Embaucher     hemedmechanical
Embaucher     hemedmechanical

    hemedmechanical hemedmechanical

    Tanzania, United Republic of $20 USD / heure
    Electrical Engineer
    Tanzania, United Republic of
    3.2
    4 commentaires 4 commentaires $20 $ US par heure
    Electronics design Programming Arduino, ESP8266, ESP32, STM8, STM32, Nordics, Raspberry Pi Programming AVR, PIC, PICAXE, INTEL 8085 Developing Android , iOS apps Full Stack Programmer ( BackEnd and FrontEnd ) Client Server based projects ( Internet of Things ) Python for web scraping Windows app development...
    Electronics design Programming Arduino, ESP8266, ESP32, STM8, STM32, Nordics, Raspberry Pi Programming AVR, PIC, PICAXE, INTEL 8085 Developing Android , iOS apps Full Stack Programmer ( BackEnd and FrontEnd ) Client Server based projects ( Internet of Things ) Python for web scraping Windows app development with Python based Qt and Processing iDE moins
  • Embaucher hemedmechanical
  • Embaucher     BOSIREX
Embaucher     BOSIREX

    BOSIREX BOSIREX

    Kenya $50 USD / heure
    mechatronics engineer
    Kenya
    1.9
    1 commentaire 1 commentaire $50 $ US par heure
    i am a qualified professional mechatronics engineer .am an expert in both combined mechanical and electrical and electronics engineering and control system and automation.i will offer best services in the skills i highlighted above as am always ready to explore my skills
    i am a qualified professional mechatronics engineer .am an expert in both combined mechanical and electrical and electronics engineering and control system and automation.i will offer best services in the skills i highlighted above as am always ready to explore my skills moins
  • Embaucher BOSIREX
  • Embaucher     Sukanta0110
Embaucher     Sukanta0110

    Sukanta0110 Sukanta0110

    Bangladesh $10 USD / heure
    Electrical Engineer|Arduino Expert|PCB Designer
    Bangladesh
    1.3
    2 commentaires 2 commentaires $10 $ US par heure
    ✋ Hi! I have completed my B.sc in Electrical & Electronic Engineering. I have been working on the field of Circuit Designing, PCB Layout Designing & Consultancy, Microcontroller Based Projects, Arduino & IOT based automation Projects & Robotics Projects Implementation. I am a robotics enthusiast and an electronics...
    ✋ Hi! I have completed my B.sc in Electrical & Electronic Engineering. I have been working on the field of Circuit Designing, PCB Layout Designing & Consultancy, Microcontroller Based Projects, Arduino & IOT based automation Projects & Robotics Projects Implementation. I am a robotics enthusiast and an electronics components researcher. I have experience about ✅Circuit Design ✅ PCB design & Layout designing using the following software: ➽ Altium ➽ Autodesk Eagle ➽ Proteus ➽ KiCad ➽ Orcad ➽ DesginSPark etc. ✅ I had implemented lots of IOT & Arduino based projects using Arduino, ESP8266, ESP32. Some of them are: ✔ Smart Wheel Chair ✔Android App Based Automation Project ✔ PID based line follower ✔ PID based wall follower ✔ Object detector for vision impaired person ✔ Smart dust collector ✔ Mini range radar system ✔Automatic Sow Seeding Robot ✔ IOT based Water, Gas and Power Consumption monitoring System ✔ Smart Multimeter with Oled display ✔ Mini range radar system and so on. ✅ I can also provide good quality Engineering Report service using: ✔ Latex ✔ Microsoft Word ✅ I had designed electrical machine with theoretical calculation : ✔ Distribution Transformer ✔ Induction Motor My goal is to provide : ✅ Best effort and quality for every project at reasonable rate ($) . ✅ Free servicing facility even after completing the project. ✅ The project perfectly within shortest possible time. Even i will try my best to complete my project before the expiration time. So you can completely rely on me. moins
  • Embaucher Sukanta0110
  • Embaucher     shazelectrical
Embaucher     shazelectrical

    shazelectrical shazelectrical

    Pakistan $4 USD / heure
    Electronic Engineer
    Pakistan
    0.5
    1 commentaire 1 commentaire $4 $ US par heure
    Hello ; I AM Electronic engineer and inventor. .Experienced in field of Embedded System Design. Main Area of Interests are Home Automation, Industrial Automation,IOT System Design,Embedded System Design,PCB Design, Vision System Design based on Matlab. Expertise in Technologies:AVR,PIC,ARM,PSoC,Arduino...
    Hello ; I AM Electronic engineer and inventor. .Experienced in field of Embedded System Design. Main Area of Interests are Home Automation, Industrial Automation,IOT System Design,Embedded System Design,PCB Design, Vision System Design based on Matlab. Expertise in Technologies:AVR,PIC,ARM,PSoC,Arduino RaspberryPi. Im Full Stack Developer( prototype/ PCB/ firmware/software/Mobile Application). Have knowledge in designing TWS earphones. And have interest in developing other wearables in the domain of IoT. moins
  • Embaucher shazelectrical
  • Embaucher     mozumder007
Embaucher     mozumder007

    mozumder007 mozumder007

    Bangladesh $10 USD / heure
    R&D Electronics Engineer
    Bangladesh
    2.8
    1 commentaire 1 commentaire $10 $ US par heure
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done...
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done many projects. and they are #iot based load control #iot based dimming fan light #iot based sending data to website #gsm based security project #fingerprint attendance system #advanced pid line following robot #sun tracking solar system #home automation #iot agricultural monitoring system #obstacle avoiding robot # small range radar system using sonar sensor . # Ir remote-based load control circuit. # design and implementation of custom made arduino and stm32 boards . # Bluetooth controlled car . # wireless data transmission using nrf module # Home security device using esp and gsm module. # Mini drone with Esp 32 . # STM32 featured line following robot and many more robotics projects. I have experience about: 1.Circuit Design 2.PCB Design & Layout making using the following softwares : ✅ Altium ✅ Autodesk Eagle ✅ Proteus ✅ Orcad ✅ KiCad etc My goal is to provide : ✅ Best effort and quality for every project at reasonable rate ($) . ✅ Free servicing facility even after completing the project. ✅ The project perfectly within shortest possible time. Even i will try my best to complete my project before the expiration time.Please allow me to complete your project and i am ensuring my best effort for this.I would love to hear more about what would make this project successful for you and explore if we would be good fit to work together.I am looking forward to your response and wish you all the best for you future. So you can completely rely on me. moins
  • Embaucher mozumder007
  • Embaucher     tonoy0167
Embaucher     tonoy0167

    tonoy0167 tonoy0167

    Bangladesh $10 USD / heure
    Routing & Switching Network Engineer
    Bangladesh
    1.6
    1 commentaire 1 commentaire $10 $ US par heure
    I have been working in core network in BD largest ISP more than 6 years. I am CCNA and CCNA security certified.So Cisco based network solutions are the most powerful side of me. I am expert in network simulation software like GNS3 , Cisco Packet Tracer, Riverbed Modeler. Core Technical Skills: ================== #...
    I have been working in core network in BD largest ISP more than 6 years. I am CCNA and CCNA security certified.So Cisco based network solutions are the most powerful side of me. I am expert in network simulation software like GNS3 , Cisco Packet Tracer, Riverbed Modeler. Core Technical Skills: ================== # Routing Protocol-- Static, OSPF, BGP, EIGRP, RIP. # Design and implement small, medium and large scale enterprise networks. # VLANs, Spanning Tree Protocol (STP), VTP, LACP, HSRP. #L2-MPLS,L3-MPLS # DHCP, GRE, IPSEC. Hands-On Experience: ===================== # Cisco Routers (NCS 5500, ASR 1006, 7606, 7604, 7301, 7206) # Cisco Switches(Nexus 2K, Nexus 3K, Nexus 7K, Catalist 2900 series, Catalist 3500 series, 4500 Series, Small Business SF-300) # Juniper Routers (MX 104, ACX 2200) # Mikrotik Router (CCR 1036, CCR 1072, 3011, RB 450) # Other Vendor devices (Netgear, BDcom, Huawei) moins
  • Embaucher tonoy0167

Bonjour , voici certains freelances offline

Bonjour , voici certains freelances offline correspondant à ""